Battery Hold Down Brackets.....

[0rion]

Made up a few more of these. Just have 1 finished right now but have a couple more drying. Changed them up a bit. I used 3/4" aluminum instead of the 1" steel. Noticed my steel one had started to rust a little so I'm replacing it with aluminum instead of stripping and repainting it and 3/4" was all I could find. My original thread is HERE that gives battery size details and things like that. I also drilled the holes smaller so please measure your battery and make sure it's the same size as mine. It should be the same size but please measure to be sure. If it's not the same size I can make one that does fit if you give me the dimensions. I test fit every one of these to my battery to make sure they fit. I have a whole stack that either don't fit right or are drilled a little off center. I try to get these to look as good as possible but in the end they're hand made and not machined.

Same price as the aluminum in the old thread......$20 shipped and I'll cover paypal fees.

[1fastcamarosss11]

ttt for a good seller.

[0rion]

bump