parts list for approval

[jiveass]

So im puttin another 350ci engine in the vette, and here is the parts list of what im gonna get...unless you guys see something thats not going to work. any suggestions are welcome.

Cam-Comp Cams thumpr 279th7
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,000-5,800
Intake Duration at 050 inch Lift 227
Exhaust Duration at 050 inch Lift 241
Duration at 050 inch Lift 227 int./241 exh.
Advertised Intake Duration 279
Advertised Exhaust Duration 297
Advertised Duration 279 int./297 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.479 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.465 in.
Valve Lift with Factory Rocker Arm Ratio 0.479 int./0.465 exh. lift
Lobe Separation (degrees) 107
Camshaft Gear Attachment 3-bolt
Intake Valve Lash 0.000 in.
Exhaust Valve Lash 0.000 in.
Grind Number 279TH7

Summit Racing 1.5 ratio roller rockers

Summit racing valve spring and retainer kit

Holley 750cfm 4160 adjustable float carb

Weiand 8150 stealth intake manifold

[garygnu65]

is this a sbc or gen 3 /ls motor?

[jiveass]

is this a sbc or gen 3 /ls motor?

sbc from 86 chevy p/u

[garygnu65]

remember to run the right oil to brake in the cam.I like the elderbrock AIR-GAP ,made more power in a intake shoot out in chevy hi-proformance.run plastic carb spacer ,and make a air pan to take the cool air from in front of the radiator . a 2x3 sheet of aluminum works.I see good results with the compcam Xtreme energy cams also.run a good HEI dist. also. I have a 80 vette with a 427 sbc,3000lbs stiff springs.