cam position sensor replacement?

**PAT-LS101** · 01-23-2009, 06:07 AM

When doing the cam position sensor I notice u have to take off the intake manifold, Is there any other way to do this?

**NoscamaroSS** · 01-23-2009, 07:46 AM

Nope, but taking the intake off is pretty damn easy though.

**0rion** · 01-23-2009, 09:05 AM

here's a write up at ls1howto on swapping intakes. This will pretty much give you a step by step on pulling and re-installing the intake. Pretty easy job really.
http://www.ls1howto.com/index.php?article=5

**PAT-LS101** · 01-23-2009, 02:44 PM

thanks guys.... ive been having this starting issue it all leads to this sensor

**irishpenguin13** · 01-23-2009, 03:25 PM

speaking of....what kinda work is involved with putting an LT4 intake on?

**JoshieDoom** · 01-24-2009, 09:20 AM

Originally Posted by irishpenguin13

speaking of....what kinda work is involved with putting an LT4 intake on?

Kinda need to start a thread in the lt1 section for that lol

**irishpenguin13** · 01-27-2009, 07:41 AM

word.

**irishpenguin13** · 01-27-2009, 07:41 AM

sorry

**Boomer Sooner** · 01-27-2009, 07:09 PM

I had my cam sensor replaced by my mechanic because like you, I was having starting issues. I was also having loud backfiring issues as well and he traced it down to that. As mentioned above, you do have to take the intake manifold off. Total cost if I remember was like $250 or so for everything. Just a little FYI.