header install in pics

**jiveass** · 03-25-2010, 11:46 AM

Originally Posted by sjsingle1

my engine leaks more oil than a iraqi pipeline

just another character flaw....self-changing oil

**sjsingle1** · 03-25-2010, 03:58 PM

good thing i have stock in mobil oil

**Joels1** · 04-02-2010, 09:10 AM

Noticed you removed the air pump..but one of the hoses fits on my slp air box...do I need to cap that off or something???

**sjsingle1** · 04-02-2010, 12:56 PM

fill in that hole in your SLP air box......http://www.ls1.com/forums/showthread.php?t=130641

**Joels1** · 04-02-2010, 01:03 PM

Nice...thanks a million!!

**Joels1** · 04-13-2010, 07:22 AM

Did you remover the passenger motor mount to get the header installed? my passenger is giving me problems.Think I`m gonna go from the top.Jack motor up remover starter an install???

***SMWS6TA*** · 04-13-2010, 09:38 AM

Mine went in so easy it's was scary. I only had to push hard on the drivers side to get them in. The passenger side had no issues.

**sjsingle1** · 04-13-2010, 02:08 PM

my pass side went in no pro..........its the driver side that i had to take out the pedestal

***SMWS6TA*** · 04-16-2010, 11:37 AM

drivers side is always the POA for installing LT headers...

**418LS1** · 04-21-2010, 04:29 AM

Nice write-up. I plan on doing spohn solid mounts here soon. I already have my headers installed so it will be a challenge.

**5abivt** · 04-21-2010, 05:25 AM

It just baffles me when looking at your ground clearance why header manufacturers cant just raise where the last bend is on the primaries by 1 inch and there would be no loss of ground clearance. Still looks tucked up well but poor engineering by all these companies.

**sjsingle1** · 04-21-2010, 09:31 AM

comparing my ground clearance with other pics i see.......no set of headers offers a lot of clearance...at least mine is no worse

**TA98** · 04-21-2010, 09:53 AM

What kind of headers were those?

**sjsingle1** · 04-21-2010, 02:19 PM

Tsp lt

**qwk93ta** · 04-22-2010, 08:24 AM

As others have said....nice write-up!!!

**Camaro69Mac** · 05-19-2010, 04:58 PM

Originally Posted by sjsingle1

I see the msd wires are real close to those headers? How are they now? they melt at all? I got the same wires and that seems like its gonna be a problem

**qwk93ta** · 05-20-2010, 02:32 AM

Originally Posted by Camaro69Mac

I see the msd wires are real close to those headers? How are they now? they melt at all? I got the same wires and that seems like its gonna be a problem

Mine are close too, but no burning after about 500 miles.

**vette0009** · 05-20-2010, 05:15 AM

Nice write up !

Thanks for helpin out

**sjsingle1** · 05-20-2010, 05:24 AM

Originally Posted by Camaro69Mac

I see the msd wires are real close to those headers? How are they now? they melt at all? I got the same wires and that seems like its gonna be a problem

they are a little close.......MSD boots do bend.....so I bent it out of the way......no worries