Results 1 to 2 of 2
Thread: 94 6 speed trans questions
-
07-29-2008, 09:37 PM #1Junior Member
- Join Date
- May 2008
- Location
- Crowley, Tx
- Age
- 55
- Posts
- 13
94 6 speed trans questions
Can you use a 94 6 speed with a ls1 or a 6.0L engine? I know the bolt pattern on the bell housing leaves out one bolt but what do I use as a clutch and hyd system? Thanks in advance.
Chase
-
08-10-2008, 08:40 AM #2Nitrous Tuner
- Join Date
- Aug 2006
- Location
- WestCoast AZ-CALI
- Posts
- 4,704
Silver- 05 Goat SMASHED
Not sure on the input shaft housing. . . . . . . . . .
Being a 94 it came from a LT1 car it uses a PULL style clutch which is unique to those cars.
Don't be afraid of the bottle!!! Be afraid of your tune!!!
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Texas speed 224R Cam Questions
By Justin93 in forum Internal EngineReplies: 16Last Post: 09-04-2008, 05:40 PM -
17 psi srt4 5 speed vs 6 speed 99' trans am
By via sin dios in forum Kill StoriesReplies: 21Last Post: 05-26-2007, 03:05 PM -
6 speed questions?
By Airguy in forum Manual TransmissionReplies: 6Last Post: 05-20-2007, 08:39 PM -
1996 T/A 6 speed/rear end questions,
By fordwhupper in forum Manual TransmissionReplies: 1Last Post: 03-14-2007, 04:09 AM -
6-Speed 350 in 3rd gen questions....
By Silver Streak in forum General HelpReplies: 0Last Post: 03-09-2007, 05:11 PM
Bookmarks