what size injectors?on set up

lilicedout24 · 12-03-2005, 05:48 PM

i have a 98 T/a a4 going with c6 intake TR224 cam/tb ported /tb enhancer/whisper lid etc... just wanna know what size injectors to get away from stock but still hold up when i make bigger mods

**nhraformula** · 12-04-2005, 08:04 AM

unless you get some type of forced induction, the stockers are fine.

**Mr. Luos** · 12-04-2005, 08:49 AM

Agreed.

May I also recommend the LS6 intake over the LS2 intake.

lilicedout24 · 12-04-2005, 09:13 AM

thankx i was reading up on the venom injectors they were showing charts where they showed increase in horse power. i wanna get nos a 150 shot or 200 im a old chevy 350 man just stepping up to the new shit so im a lil green at the ram air and other stuff etc.. just wanna do a few things so i can get a few races in on the street and make money to spend money ya get it.

lilicedout24 · 12-04-2005, 09:20 AM

im trying to sell this intake now this c5 i brought the wrong one thats what i mean being green i spent bad money not knowing i was just told get a new intake from a new ls1 or 2 and then when i get it i read all kind of stuff so i decided to sell the c5 for a c6 or ls6

***Ed Blown Vert*** · 12-09-2005, 12:14 PM

If you need to get something bigger. Go with the 42#s SVO Injectors.

**nevrlift** · 12-09-2005, 01:56 PM

Originally Posted by lilicedout24

thankx i was reading up on the venom injectors they were showing charts where they showed increase in horse power. i wanna get nos a 150 shot or 200 im a old chevy 350 man just stepping up to the new shit so im a lil green at the ram air and other stuff etc.. just wanna do a few things so i can get a few races in on the street and make money to spend money ya get it.

please do yourself a favor and DO NOT buy Venom injectors....i used to work for them and every single set of "hi-flo" injectors came back for reflow....they cannot get them right.....use RC or accel if you have to but dont buy Venom because they suck ass.....i know first hand!

**ninobrn99** · 12-14-2005, 06:19 PM

Originally Posted by Ed Blown Vert

If you need to get something bigger. Go with the 42#s SVO Injectors.

agreed. if you look at alot of the bigger cammed cars out there with stock injectors, they're using the hell out of them. The duty cycles are pretty high. Im running a f13 112 cam only "ls6" with the 42# injectors. The only issue a few people along with myself are trying to figure out is why it goes rich in decel. other than that, they're great!
Nino

**NeeD4SpeeD** · 12-14-2005, 08:08 PM

Originally Posted by Ed Blown Vert

If you need to get something bigger. Go with the 42#s SVO Injectors.

Who sells the SVO 42#'s??? Cant find em..... And i just got a big cam so i think it would be a good idea to buy em...

**ninobrn99** · 12-14-2005, 08:12 PM

cartek i know for sure.

***Ed Blown Vert*** · 12-14-2005, 09:10 PM

Originally Posted by NeeD4SpeeD

Who sells the SVO 42#'s??? Cant find em..... And i just got a big cam so i think it would be a good idea to buy em...

http://www.neweraperformanceparts.co...KV=bo42fbody|0

**NeeD4SpeeD** · 12-14-2005, 10:26 PM

Originally Posted by Ed Blown Vert

http://www.neweraperformanceparts.co...KV=bo42fbody|0

thx ed but thoes arent the SVO's... I dont think SVO makes anything higher then 32# but i could be wrong... Not that i care no biggie..

Also quick ? which injectors are better..

The Bosch 42# green tops that you posted the link 2??

or

The racetronix 42# injectors??

***Ed Blown Vert*** · 12-15-2005, 07:37 AM

The SVO are made by Bosch.

**Racetronix** · 12-19-2005, 10:25 PM

Originally Posted by NeeD4SpeeD

thx ed but thoes arent the SVO's... I dont think SVO makes anything higher then 32# but i could be wrong... Not that i care no biggie..

Also quick ? which injectors are better..

The Bosch 42# green tops that you posted the link 2??

or

The racetronix 42# injectors??

They are Delphi 42# injectors

Info can be seen on our web page.
They are available from select Racetronix dealers such as Harris Speedworks as well.

**NeeD4SpeeD** · 12-19-2005, 11:05 PM

Awesome thanks guyz!!! Also 1 more thing... Just bought a decent sized cam 231/237 .595/.602 112LSA do you think i should buy the injectors or should i wait???