diablo tune

**kebie05** · 10-12-2007, 11:43 PM

i just purchased a diablo predator with a slp tune on it, my question is what exactly does this tune do? what is so special about it? anyone else have one? i couldnt tell any diff in the car? did you when you tuned yours? thanks

**xzaero0** · 10-13-2007, 09:07 AM

I noticed mine quite a bit. Mine is an A4, now everytime at 3/4 or more throttel it barks going into 2nd. That was just with the Diablo Tune not a SLP tune. I still play around with mine from time to time adjusting Fan Speed and timing and other stuff.

**SeVeReDiStOrTiOn** · 10-13-2007, 08:27 PM

Bummer...uyou should've just bought the regular diablo tuner. SLP's version nerfs the users ability to adjust all of the parameters a lot compared to the reg version. You can always talk to Johan or mikel at diablosport and see what they say...i'm sure they can still give you a custom tune. They are the ones that post on their forum site... http://diablosport.com/index.php?nam...BB2&file=index

**xzaero0** · 10-13-2007, 09:51 PM

From what I hear, most of SLP's items are way over rated. Other than the lid and the LM series resanators, I would be very carefull buying an item from that Brand. I have a SLP LM2 and an underpulley I havent really had any problems with them but others have had problems with their stuff. Just remember before you buy anything always research it!

**kebie05** · 10-13-2007, 11:14 PM

on my shift firmness setting, i set them to -25% to make it shift faster, but i test drove it, and couldnt really tell that either. does anyone know any good setting throughout all the options?

**SStriker** · 10-13-2007, 11:33 PM

shift firmness? you mean line pressure?

To make it shift faster it would be your shift timming.

**kebie05** · 10-14-2007, 12:45 AM

yeah that... shouldnt it seem like the gears snatch after the change?

**SeVeReDiStOrTiOn** · 10-14-2007, 08:31 AM

Originally Posted by kebie05

on my shift firmness setting, i set them to -25% to make it shift faster, but i test drove it, and couldnt really tell that either. does anyone know any good setting throughout all the options?

Shift firmness makes the shifts a little harder.....and you'll want to add 25% not take it away.

**kebie05** · 10-14-2007, 10:47 AM

this is what the manual says....
"when adjusting to a negative percentage, the shift adaptation will be shorter,hence a quicker shift. positive adjustment will yield a longer and slower shift."