What mods is it going to take...

**Huskerz1** · 01-20-2007, 10:07 PM

to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

**Danger731** · 01-21-2007, 05:40 AM

those bolt ons may net you 360hp tops, you'll need H/C or a big shot of juice

**jasonisdn** · 01-21-2007, 06:11 AM

Originally Posted by Huskerz1

to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

put a 100 shot on it you beat him. cheaper than H/C and much quicker install. hide the bottle in the spare tire well and go get him. when my car was a h/c car (years ago with old afr's and a small cam , oh LT1 by the way) i could run even on motor with a stock cobra, hit the button and he got about 5 cars put on him from first to 3rd.

**Mr. Luos** · 01-21-2007, 06:13 AM

With your planned mods it will be close. Might be able to pull him slightly.

**Hurley711** · 01-21-2007, 07:12 AM

Originally Posted by Huskerz1

to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

Don't expect 420 RWHP with those mods. Better add some heads to that list......

**nhraformula** · 01-21-2007, 07:53 AM

Originally Posted by Danger731

those bolt ons may net you 360hp tops, you'll need H/C or a big shot of juice

what, are you high?
hes putting in a decent sized cam and just about all the bolt ons.
hell have around 400 to the wheels

**nhraformula** · 01-21-2007, 07:59 AM

Originally Posted by Mr. Luos

With your planned mods it will be close. Might be able to pull him slightly.

i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
cobras have about 600 pounds on our cars. thats like 6 tenths at a track.

**Ricer Cooker** · 01-21-2007, 08:39 AM

Originally Posted by Huskerz1

to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

What is a Torqer2 and does full exhaust mean headers and back?

**jasonisdn** · 01-21-2007, 09:19 AM

Originally Posted by Ricer Cooker

What is a Torqer2 and does full exhaust mean headers and back?

heres 1 version
http://texas-speed.com/shop/item.asp...d=168&catid=44

**Ricer Cooker** · 01-21-2007, 09:45 AM

Originally Posted by Huskerz1

to beat my neighbors stock 03 Cobra? I know, I know, they are called "Terminators" for a reason. I'm going to have a Torquer2, full exhaust, LS6 intake, pulley, and tune put on very soon. Expecting around 420 rwhp. We've played around alittle already and it ain't close right now. Going for the surprise attack on him.

Magic Stick 4 looks better, same price too

.

**Huskerz1** · 01-21-2007, 09:13 PM

Originally Posted by nhraformula

what, are you high?
hes putting in a decent sized cam and just about all the bolt ons.
hell have around 400 to the wheels

Thankyou. Finally, somebody not smokin the rock. Don't see too many answers here. MS4 sounds really neat and all but I prefer a little driveability. I guess if I can't get it done with my current mod setup then I'll bring some heads into the picture when I can.

**FASTSS** · 01-22-2007, 07:49 AM

You will be fine. If you have decent tires, go from a dig.

**Pumped03** · 01-22-2007, 09:03 AM

Originally Posted by nhraformula

i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
cobras have about 600 pounds on our cars. thats like 6 tenths at a track.

How would he know you would slaughter him off the line? What mods do you have because a bonestock 03 will dyno 360 rwhp SAE. A catback may be good for 380 because Ford put baffles in the stock 03 exhaust. The outlets had about 1.5 tubes surrounded by fiber.

You mean a Camaro weighs 3200 pounds?

**nhraformula** · 01-22-2007, 01:22 PM

Originally Posted by Pumped03

How would he know you would slaughter him off the line? What mods do you have because a bonestock 03 will dyno 360 rwhp SAE. A catback may be good for 380 because Ford put baffles in the stock 03 exhaust. The outlets had about 1.5 tubes surrounded by fiber.

You mean a Camaro weighs 3200 pounds?

its called a stall converter.
i havnt had any stick shift car out "60 me.
my car weighs 3380.

**ss~zoso~ss** · 01-22-2007, 01:38 PM

dont race him from a dig, i think those have 4.10's and if he's got tires and skills he'll pull the shit outta u from the hole and it'll be hard to catch him,

u gotta race him from a roll, i think those cars may be a little lighter too idk

**Ricer Cooker** · 01-27-2007, 03:49 AM

Originally Posted by nhraformula

i ran an 03-04 cobra off a 35mph roll because he must of knew i would slaughter him off the line. anyways even with my stall and mods, at 35 mph the car has kinda a dead spot there. it wont kick down back into first.

anyways, he punched it and so did i. he pulled me slightly, we went from being even to him having his doors at my front bumper. by about 60mph we were even and after i started inching on his ass. i dont know what mods he had, but he atleast had a catback.
cobras have about 600 pounds on our cars. thats like 6 tenths at a track.

He has a vert Maro, so it weighs 300 #s more. Stock Cobras should run around a 12.8 E.T., use that, at least as the target to beat, when modding.

**nhraformula** · 01-27-2007, 05:20 AM

Originally Posted by Ricer Cooker

He has a vert Maro, so it weighs 300 #s more. Stock Cobras should run around a 12.8 E.T., use that, at least as the target to beat, when modding.

true that

**Huskerz1** · 01-27-2007, 09:44 PM

Thanks Ricer Cooker. After my mods, I think I'll be in the that neighborhood.

**7camaro7** · 01-28-2007, 09:26 PM

we've both got 6spd SS verts

**Corey1987** · 02-04-2007, 06:19 PM

a buddy of mine ran his 98 TA today, A4, Headers, ORY, Borla Carback, lid, ET Streets and ran 12.7s and 12.8s all day so i would think mods along these lines would put you near a stock terminator.