Putting in aftermarket speakers

[Skitzo Gryphon]

The speakers back seat panels of my '98 formula with the monsoon system are blown. I want to replace them with a set of Sony Xplode speakers they were cheap, and it was 2a.m when I decided I was going to put speakers in), but the wireing has me stumped. Should I just splice the 4 wires from the car into 2 for the speaker? Or are two for an amp on the speaker? Also, what size are the speakers in the hatch area?

[0rion]

post this into the stereo and electronics area. You'll get way more help there. I do know it's not as simple as just throwing some different speakers in there because the stockers are 2 ohm speakers. The sails are 6" and I *think* the subs are also but not positive on that.

[NvyBluMtlc02WS6]

also, if you have the monsoon system, the rear panel speakers only receive low frequencies. do not buy a full range speaker and put it in, because the mids and tweeters will not work unless you bypass the factory amp. I would go with a set of kicker 6 inch or get a component system.

[Redphoenix1998]

most places will sell a speaker adapting clip. Go to a stereo shop and check. The rears are 6.5", fronts are 6.5"s with a tween pod. Rear is a combination 4" and something else but you're able to use a 6x9

[Skitzo Gryphon]

Alrigh. Thanx for the advice.