Results 1 to 19 of 19
Thread: Polished TT2's
-
05-09-2013, 04:57 AM #1
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Polished TT2's
The trans am I got a month or 2 ago came with polished Torque Thrust 2's on it...I really like the rims and the lips of the rims are not that bad and still have a pretty good shine to them, but its very apparent the spokes of the rims have not been polished well, if at all in a LONG time...plus, it looks like somebody got really excited about washing the rims with some type of wheel cleaner that probably had acid in it...Any recommendations on how to go about tackling the polish on these rims? Im pretty sure the spokes can be brought back to the point that they look like the lip of the wheels, but Im not sure what would be the best product to use up front along with what applicator. Powerball, polish kits, etc...
Thanks
-
05-09-2013, 05:07 AM #2
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 3,111
Silver & Blue- 02 Camaro SS, 04 GTO
Can you post a picture of the wheels and show the damage. Many of the wheels made today have a clear coat on them and once it is gone you will need to have it reapplied. Pictures would help.
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k
-
05-09-2013, 05:30 AM #3
-
05-10-2013, 11:23 AM #4
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
I fixed the problem...I painted them last night.
-
05-11-2013, 05:34 AM #5
DAMN!!! They look pretty fricken awesome. Nice paint job.
-
05-11-2013, 06:33 AM #6
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Thanks man. Took about 5 hours total + dry time. I really like how they turned out.
2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved
2019 Ram 1500 Crew Cab Laramie Limited
2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
06 Quad Cab HHHHemi - Sold
99 Hugger Orange Camaro - Sold
97 Camaro - Sold
-
05-12-2013, 01:13 PM #7
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Bummer. I would have said give yourself a day and polish the hell out of them. Would have looked SO much better than the paint.
I know how much of a pain in the ass those wheels can be, but man, when they are polished properly and clean, they look SO good on the T/A's.
I had them, use Mother's Billet and the mini-powerball. Took plenty of time, but worth it.
-
05-13-2013, 04:22 AM #8
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Last edited by theorangeguy; 05-13-2013 at 06:55 AM.
-
05-13-2013, 06:39 PM #9
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Mother's Billet.....if you can find it.
-
05-22-2013, 04:32 AM #10
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
Paints coming off sometime in the next week...gonna give them some TLC and polish them on an upcoming weekend...
-
05-25-2013, 09:55 AM #11
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
LOL, you really don't leave anything the same for too long.
-
05-29-2013, 03:58 AM #12
-
05-30-2013, 07:38 AM #13
-
06-12-2013, 04:28 AM #14
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
TADAAAAAA! Back to polished rims she goes....only took 30days for me to change my mind and I took the paint off yesterday and used up the polish I had in my garage. Im probably going to get some better polish sometime this week and hit them again with a drill...they look better than they did before I painted them, but still need some work...if they need to be hit with some sand paper, what grit do you guys recommend or do you recommend it at all? Only reason I ask is because a few of the spokes are being an absolute PIA!!!!!!!
Last edited by theorangeguy; 06-12-2013 at 04:30 AM.
-
06-12-2013, 06:19 AM #15
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
Depends on how bad they are. If they're not too bad maybe 1000 to 2000 grit sandpaper and then polish. If they're pretty bad might have to go to a lower grit first
-
06-12-2013, 06:24 AM #16
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
I dont think they are that bad, but a high grit probably would make my life a whole lot easier on some of the spots that are being a pain to get polished.....how do you recommend polishing them? I know a lot of people use different techniques...I usually put the polish on with a towel and let it sit for about 30seconds and then go to work with the drill and wipe it off.
-
07-25-2013, 07:26 PM #17
- Join Date
- Aug 2005
- Location
- Pittsburgh, PA
- Age
- 42
- Posts
- 21,720
My life is a- Ben Stiller movie.
This:
Plus this:
with this:
Followed by this:
with this:
Makes this
THIS!
-
07-26-2013, 03:35 AM #18
-
07-27-2013, 04:47 AM #19
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
polished
By motley in forum Wheels and TiresReplies: 3Last Post: 04-09-2010, 11:01 PM -
Polished something... other than my knob
By pajeff02 in forum Appearance SectionReplies: 20Last Post: 02-18-2010, 06:49 PM -
cme polished what do you think?
By chevygirl in forum Appearance SectionReplies: 5Last Post: 04-14-2007, 06:45 PM -
Polished POO!
By Wulfe13 in forum Almost Anything GoesReplies: 33Last Post: 04-14-2006, 10:18 PM -
Polished TT's
By aPerfectTransAM in forum Parts Wanted / TradeReplies: 2Last Post: 02-03-2006, 10:53 AM
Bookmarks