Results 1 to 2 of 2
-
12-10-2009, 06:07 AM #1Speak the truth
- Join Date
- Apr 2006
- Location
- Charlotte, NC
- Age
- 61
- Posts
- 2,307
Hugger Orange/W stripes- 1999 Z28 M6
Topping off smoothed out the shifting
My '99 M6 just went over 102,000. Never done anything to the tranny to this point and still have the original clutch. In the last month, I noticed the tranny seemed to not shift as smoothly and would occasionally act like it didn't want to go into gear. This coincided with the colder weather around here. I've had the rear-end pinion seal drip, but only put a few ounces of gear oil in the differential in the last four years. I've never seen any type of leak from the tranny.
Well, yesterday I changed oil/filter (Pennzoil Platinum 10w30, NAPA Gold 1042) and decided to top off the tranny fluid. I bought one quart of Dexron III and a pump that pulls the fluid directly from the bottle (well worth the $8 it costs from Advance). I ended up putting less than half the quart in before I got the fill level drip.
After I got everything completed and cleaned up, I took the car out for a quick check. The shifting was immediately back to being smooth and decisive. I guess just a few ounces of tranny fluid were all it needed. Thought I's share that in case anyone else has noticed a similar issue.
-
12-13-2009, 08:03 AM #2
I had a similiar thing happen to me a few years back. I had a probe gt and replaced the tranny. I took it on the road, and it wouldn't stay in 5th. I had a shop look at it and found out i put the tranny in dry. He filled it for me and i never had a problem with it. I sure was worried when he told me it prob needed a new tranny.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Smoothed and Blacked out my Tails
By ls1camino in forum Appearance SectionReplies: 87Last Post: 12-22-2009, 09:08 PM -
Smoothed and Painted my Airlid
By ls1camino in forum Appearance SectionReplies: 12Last Post: 05-07-2009, 05:05 PM -
Smoothed Airbox Lid?
By 2000silverbullet in forum Camaro / SSReplies: 4Last Post: 10-24-2007, 06:32 AM -
topping out with the top down
By charlesss in forum ConvertibleReplies: 27Last Post: 08-23-2007, 11:44 AM -
Fiberglass Molding - Topping It Off - Fabricating A Multi-Composite Enclosure Part 4
By Ed Blown Vert in forum Stereo and ElectronicsReplies: 0Last Post: 07-10-2007, 05:10 AM


Reply With Quote

Bookmarks