cold air kits

**outlawZ28** · 11-30-2009, 04:15 PM

what is better slp cold air induction pac or the ftp ram air kit

**c5z28** · 11-30-2009, 04:18 PM

Any used lid, ssra or ftra. What I listed should not cost more than $210 plus some cheap weather stripping. How much are the kits?

**outlawZ28** · 11-30-2009, 04:19 PM

slp is like 120 and ftp is 175 but this isnt with the lid its just the duct work

**c5z28** · 11-30-2009, 04:34 PM

Look at the ssra on ebay, can you give me a link to the ftp? Just from experience these things pick up alot of dust.

**outlawZ28** · 11-30-2009, 04:41 PM

dont know how to do links sorry but they are one of our sponsers so just click on that and i know it will pick up more dust i did the free air mod and even that picks up a noticable amount

**outlawZ28** · 11-30-2009, 04:47 PM

yeah i have seen that super sucker kit not much on plastic plus it seems like water could get sucked up there way to easy

**c5z28** · 11-30-2009, 04:51 PM

All you have to do it copy and paste the url.
You risk water with any of the kits, I didn't feel a difference with the ram air kit if that is what you are looking for.

**outlawZ28** · 11-30-2009, 04:55 PM

thanks thats what i wanted to know plus taking a second look at it i noticed the only difference between the two is a small piece of sheet metal i could buy for five bucks instead of paying over fifty more for the FTP kit

**Ramairgod84** · 12-03-2009, 05:46 AM

you can also try making your own. You need a 24x48 sheet of aluminum, take out your bottom radiator support, make some sides for it, and theyve said to get some decent gains from it.

**Z28_Driver** · 12-03-2009, 07:30 AM

Don't know about the FTRA or the SLP. I have the SSRA. I won't do a whole lot for you at low speed. However at high speed it starts to make a lot of difference. Don't have any problems with water going up it either. Air filter is always dry and dusty.