What gears and stall should i get? ASAP

[02Sweet]

4.10's aren't that bad on the highway. 80 was like 3K in mine. I drove mine on the weekends with 4.11's (9inch). I estimated my gas at like 21/22 mpg mostly highway (Down from 30 with 2.73's and 1800 rpm 80 mph) with cam and 3600 stall. Don't regret it and would do it again in a heart beat. With 4.10's and a stall though get ready for stock in tires. With 315's and full rear suspension (LCA, PHR, TA, V6 springs, KYB shocks, etc) 1st and 2nd gears on street tires were useless. After the tune I could punch it at 45-50 and would be completely sideways.

Heres a vid of mine pretune. The trans was shifting too early and the stall acted funny from a 2nd gear roll.

http://s117.photobucket.com/albums/o...t=TheBitch.flv

She was a monster.

That is one nasty car!!! I bet you miss it

[slims00ls1z28]

Ya but at least I still have it just waiting on funds to clear up to rebuild the motor. Fortunately everything I put in the motor came out unscathed. I still wash it and sit in if from time to time to let her know she won't stay down long lol

[bmred99ws6]

I put 4.10's in my 99 ws6 with a 3000 stall and I actually lost a tenth and 2 mph from the stock 3.23's.

[sic2001]

Then 3.73's should be good.

I drove an A4 on the freeway with 3.73's. Damn thing sounded like it always needed to shift.