Results 1 to 8 of 8
Thread: Rear wheel bearings
-
10-11-2016, 09:34 AM #1Junior Member
- Join Date
- Aug 2005
- Location
- Corona, CA
- Posts
- 86
Red- 2001 Chevrolet Camaro Z28
Rear wheel bearings
Looking to buy new wheel bearings. From what I've read, I need 2 bearings, 2 seals, rear-end gasket and gear oil to perform the replacement. Can anyone give me their input on brands and part numbers? I was looking at Timken but there are so many sizes and part numbers it gets confusing....help!
Thanks2001 Chevrolet Camaro Z28, M6, Eibach Pro-kit, BMR STB, BMR Adj-PHB, BMR RB's, BMR SB's, BMR Adj-TA, KYB Adj-shocks, K&N, SLP LM, SLP Y-Pipe, SLP Intake, Predator Custom Tuned...
Treat her well and she'll put a smile on your face every time you get on her!
-
10-11-2016, 11:14 AM #2Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Moog and Timken are really good. I used Timken on my 8.8, in fact I just got thru having them pressed on.
-
10-11-2016, 11:48 AM #3Junior Member
- Join Date
- Aug 2005
- Location
- Corona, CA
- Posts
- 86
Red- 2001 Chevrolet Camaro Z28
Where did you get them from and do you have the part #'s?
Originally Posted by SMWS6TA
-
10-11-2016, 11:49 AM #4Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
This is for a 10bolt (stock) rear, right?
-
10-11-2016, 11:56 AM #5Spaz is My Mentor
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
https://www.summitracing.com/parts/t...maro/year/2001
$18.97 @ Summit
Autozone sells Timken bearings, but make sure you ask specifically for Timken Part # 5707. Otherwise you'll get a National brand, they sell the same bearing and have the same part number. I've been told that Timken has bought out National but haven't been able to confirm it.
-
10-11-2016, 12:18 PM #6Junior Member
- Join Date
- Aug 2005
- Location
- Corona, CA
- Posts
- 86
Red- 2001 Chevrolet Camaro Z28
Yes. Originally Posted by SMWS6TA
I was about to order some stuff from Summit so I'll add that in too. Thanks!
-
10-13-2016, 05:01 PM #7Veteran
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 22,146
Black & Blue- '02 WS.6 / '07 Suburban
Just a pointer in case you are not familiar with the rear wheel bearing setup on our cars. The bearings actually ride on the axle shaft and damage to the shaft is not unheard of. Be sure to check the shaft for galling and excessive wear. Is there any reason in particular that you are changing the bearings?
-
10-23-2016, 07:47 PM #8Senior Member
- Join Date
- Dec 2007
- Location
- Orlando, FL
- Posts
- 3,352
Mean Black- 1998 Trans Am
Also if you are putting new gear oil dont forget to add the additive to the fluid.
1998 TA 130k A4, LS6 intake, TunedByFrost, Airlid, AIR and EGR delete, Borla exhaust, front Eibach lowering springs, LS6 valley cover, UMI TQ arm, UMI LCA's, UMI panhard bar, Poly engine mounts, BMR relocation brackets, Blistein HD shocks and struts, Oil catch can, Autotrix window fix.
Now I have an 2001 F150 5.4L
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Wheel Bearings
By psycho_puppies in forum General HelpReplies: 3Last Post: 11-01-2011, 11:37 AM -
Well, not the wheel bearings...
By Speed_kills_WS6 in forum DrivetrainReplies: 10Last Post: 05-29-2009, 04:48 PM -
Help: Rear wheel bearings
By 02fbody35th in forum DrivetrainReplies: 2Last Post: 03-02-2009, 05:34 PM -
Wheel Bearings?
By 01ws6er in forum DrivetrainReplies: 3Last Post: 11-03-2007, 11:45 AM -
Wheel bearings
By BeaupreFan in forum General HelpReplies: 1Last Post: 09-27-2007, 01:34 PM
Bookmarks