Results 1 to 2 of 2
Thread: Problem maybe solved
-
09-01-2005, 04:32 PM #1Junior Member
- Join Date
- Aug 2005
- Location
- Central Texas
- Age
- 47
- Posts
- 24
Problem maybe solved
Well as you know I have been having idle issues and car wouldn't stay running well I unpluged my O2 sensors and now she idles fine and doesn't cut out and die. She has be running for about 50 minutes now.
-
09-11-2005, 10:55 AM #2Member
- Join Date
- Aug 2005
- Location
- Central PA, USA
- Age
- 68
- Posts
- 102
Red- 1995 Trans Am 6 Speed
My two cents. Unplugging the O2 will put the PCM into "limp home mode" which is run rich. Don't know your original problem. But, try reconnecting and see if it did what it did before. Give time for the O2 to warm to operating temps.
Of course, head to the local Advance Auto or Auto Zone for a replacement O2. They both offer free use of the O2 replacement tool with a deposit.
Good luck.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Spec Problem SOLVED!!
By Edward-T in forum Manual TransmissionReplies: 4Last Post: 12-13-2011, 04:22 AM -
Tapping noise from valvetrain - problem solved!
By DaddySS in forum Internal EngineReplies: 21Last Post: 02-25-2008, 11:04 AM -
O2 Problem Solved
By JeremyRay in forum Firebird / WS6Replies: 2Last Post: 11-14-2007, 02:12 AM -
hesatation problem finally solved
By drdon51 in forum General HelpReplies: 16Last Post: 08-07-2006, 09:54 PM -
STS problem solved..sort of
By kllrvet in forum Forced InductionReplies: 0Last Post: 03-18-2006, 07:25 PM
Bookmarks