Wish list for new hydraulics/ clutch

**Spikito** · 12-01-2010, 04:02 PM

LS7 kit, and Tick MC are ordered.

**bberretta** · 12-01-2010, 07:32 PM

Great setup! Now I just needto drop my trans again so I can replace this squeaky friggin' throw out bearing!

**Spikito** · 12-02-2010, 02:17 PM

ok so since this has been going on, ive been trying to not drive the SS much, but my other car was filthy inside and out, and needed gas, so i've been driving the SS the last week.

Yesterday, the slave was really acting up, a couple of times when i got in, clutch pedal pushed to the floor, it would start rolling forward when i started it.

pumped it a few times, it was ok, but it did it a few more times while i was running errands.

well on my way home, i kept grinding going into 1st and 3rd, and hard to get in and out of gears.

yall think something broke, or you think I just wasn't getting good disengagement between gears?

regardless, parts are ordered, car is parked.

**marksls1ta** · 12-02-2010, 04:04 PM

thanks for the order

parts have shipped out.

Thanks,
Mark

**TRANS-DAD** · 12-03-2010, 04:46 AM

Yes! pls prk car!.... & yes parts should fix prob.!.... good luck w/install!

**bberretta** · 12-03-2010, 05:26 AM

It's not the trans, but keep grinding those gears and it will be! When you upgrade the Master and Slave Cyls you'll fix the pressure loss problem.

**Spikito** · 12-03-2010, 06:11 AM

yeah...i think since all this started ive had 5 grinds, 3 in third, 2 in first, and only one was very bad....high RPMs in 3rd...the rest i backed out of pretty quick.

"I just hope this new set up feels as good as my 3.8.....lol

**bberretta** · 12-03-2010, 06:24 AM

The Tick MC with the LS7 clutch is a nice setup so it won't feel near as spongy as stock.

**Spikito** · 12-06-2010, 11:34 AM

Hey mark,

did you ship the clutch and MC separate...i got the clutch in the mail today, but not the MC

**marksls1ta** · 12-06-2010, 06:22 PM

yeah they were not together. I had the other drop shipped.

Thanks,
Mark

**Spikito** · 12-07-2010, 02:22 AM

Just checkin...thanks for the decals, I was going to ask for some of those.

**2000dreambird** · 12-07-2010, 08:37 AM

i have the Tick Master which i also got from mark, you don't need do remove the booster or the steering shaft to install but it is a PITA...only thing i recommend is having beer handy