EMBLEMPROS.com will be offering Hydrographic Dip

[HOBS]

Thanks for the reply. Thought the ghost skull look would be cool but oh well. Plenty of other patterns pick.

[Avaric3]

pm sent about sending my stuff in

[dragonZ28]

pm sent about sending my stuff in

Replied to, please let me know.

Thanks, Roger

[email protected]
www.emblempros.com
www.muffinbuster.com

[jeffsWS-6]

bad ass stuff!

[Avaric3]

Replied to, please let me know.

Thanks, Roger

i shipped out my vent trims, gauge cluster bezel, radio bezel and door handle bezels today

im havin them done in the CF-012(carbon fiber) pattern and will post pics in here and make a separate thrad wit pics too when i get them back

[Train]

wow, excellent work. the stuff you've done so far looks great! i'm anxious to see some of the fbody parts dipped. i will def. have to get a few things done

[SandmanWs7]

So can you do a LS1/LS6 intake?

[dragonZ28]

I made these tonight for myself, but wanted to show you guys. these aren't finished yet; they still need to be clearcoated to make the color and shine really pop.

The black areas on the COD controller are not stickers - they are paint. There were some extra steps involved in making these with the images, but the Call of Duty controller has a military camouflage pattern on it over a white base coat. The Gears of War controller is a brushed metal finish over metallic silver base coat. This controller will really shine when it's cleared.

[dragonZ28]

So can you do a LS1/LS6 intake?

Yes - the webbing at the base of the intake will not get coverage in it because air can not escape. We will base coat the area, and then mask it off prior to dipping. After they are dipped, we'll remove the masking tape and clear the whole thing. Look at the trunk trays in the 2010 Camaro; the recessed regions are done this way where the water drains.

[dragonZ28]

Next pieces we will be posting.

2010 Camaro rear diffuser panel.
2010 Camaro Engine cover "V8"
2010 Camaro Tailight frames
F- body interior parts.
Viper interior parts.

Others are on the list:.....

Thanks, Roger

[Lqdsilver]

Impressive work so far, interested in seeing some crazy ass wheel dips

[dragonZ28]

New pictures will be posted tonight or tomorrow

[dragonZ28]

2010 diffuser, engine cover, taillight bezels, and game controllers:

Dismantling:










Diffuser hydrodipped in CF with a gloss black upper valance:








2010 engine cover:






2010 taillight bezels:

[dragonZ28]

Game controllers:

military camo:




brushed aluminum:




Money, son!


CF with a dark grey base, very subtle:


All parts will be polished and installed in a few days.

[wheeliE-maxx]

That camaro is one hell of a rolling billboard, very nice

[0verkill]

what pat is that you are puttin on the camaro stuff.

[dragonZ28]

That camaro is one hell of a rolling billboard, very nice

We have one of these on the way:

http://www.emblempros.com/inc/sdetail/4528

We are going to be dipping that piece as well . It should balance the front with the rear seeing as the diffuser will be done in the same finish.

[dragonZ28]

what pat is that you are puttin on the camaro stuff.

621, black basecoat finished with 4 coats of clear

[0verkill]

621, black basecoat finished with 4 coats of clear

nice i may have a few thing i will get done if i can find some good used one. thanks

[Avaric3]

nice i may have a few thing i will get done if i can find some good used one. thanks

all i did was tear apart my interior and send it out to them same day... good thing my gf doesnt mind haha

which reminds me, wuts the turn around time approx?