Who wants to switch over to true HID lights & fogs

**illcul8troffcr** · 06-30-2008, 10:49 PM

These are the high beams installed. Lows and Foglights go in tomorrow. Will update with pics. These are 12000k

**2002 WS6 KILLS** · 07-03-2008, 07:47 AM

Those look amazing!!

**WS-6** · 07-09-2008, 07:19 PM

Hi everyone, I finnally give in and spent the cash on hid fogs. I like them alot I did notice I need to adjust them soon though. What do y'all think?

another:

last one:

**cobrahunter** · 07-09-2008, 10:34 PM

Very, very cool lookin'.

**SVG210** · 07-12-2008, 07:22 PM

Originally Posted by WS-6

Hi everyone, I finnally give in and spent the cash on hid fogs. I like them alot I did notice I need to adjust them soon though. What do y'all think?

another:

last one:

I contacted the guy and I got a good deal thanks bro!

one last question do these lights burn hot?

**cobrahunter** · 07-12-2008, 09:59 PM

I don't know about other people, but I've had mine on for over a year and show no heat-related problems with my bulbs, headlight housings, or wiring.

**WS-6** · 07-13-2008, 05:26 AM

Originally Posted by hurraquio

I contacted the guy and I got a good deal thanks bro!

one last question do these lights burn hot?

HI, they are no hotter than stock. Post some pics when you get them.

**2002 WS6 KILLS** · 07-14-2008, 08:47 AM

They actually run cooler than stock.

**SVG210** · 07-19-2008, 02:51 PM

Okay I installed the fogs first but It's blowing out my fuse, I'm currently awaiting help, but am going to proceed looking for the fault. too bad I dont have my test light on me

**WS-6** · 07-19-2008, 06:37 PM

Originally Posted by hurraquio

Okay I installed the fogs first but It's blowing out my fuse, I'm currently awaiting help, but am going to proceed looking for the fault. too bad I dont have my test light on me

I pm'd you check messages.

**illcul8troffcr** · 08-03-2008, 05:40 PM

Originally Posted by WS-6

I pm'd you check messages.

ok I got all three sets of Hid's ..high,low and foglights.. The low beams (while the car is running) make a horrible buzzing noise behind my instrument cluster or seems to be coming from the firewall can't tell which) but you can hear it inside and out of the car. Then one bulb goes out and the noise stops..

The high beams work fine for a while then they make the same noise. I can cut the lights off ..no noise..I'm to the point where someone is going to get one hell of a deal on the set up haha I'm tired of fucking with it and having my lights not working right.

When they work their bad ass But I'm not trying to fry anything and that noise doesn't sound nice.. Any help would be appreciated?

**illcul8troffcr** · 08-03-2008, 05:41 PM

Another point.. a few people told me it's due to the daytime running lights. but some others with the same car adding the same kind of lights said they didn't have any problem

**WS-6** · 08-03-2008, 06:01 PM

Originally Posted by illcul8troffcr

ok I got all three sets of Hid's ..high,low and foglights.. The low beams (while the car is running) make a horrible buzzing noise behind my instrument cluster or seems to be coming from the firewall can't tell which) but you can hear it inside and out of the car. Then one bulb goes out and the noise stops..

The high beams work fine for a while then they make the same noise. I can cut the lights off ..no noise..I'm to the point where someone is going to get one hell of a deal on the set up haha I'm tired of fucking with it and having my lights not working right.

When they work their bad ass But I'm not trying to fry anything and that noise doesn't sound nice.. Any help would be appreciated?

Hello, I have installed hidking's kits into my bird, sonoma, friends mazda 3, his sisters eclips (which is a bixenon and its kick ass) a coworkers explorer another coworkers mazda 6, a friend of a friends bird, a friends stang gt, a friend's grand prix gt, and my new dd 02 siera. All of which have not had any problems whatsoever. The noise you are experiencing is definatley not normal for hid's. The daytime running lights turn off when the headlights are turned on so you can eliminate that. Did you try to disconect them one at a time to try to find out if it was one ballast causing this? It sounds to me like you have a defective ballast or ballasts. You might halve to put in an additional relay to supply extra juice. The kit I had in the sonoma was originaly from a different seller and some times one side wouldnt work, so I installed a relay and they worked great so maybe try that first.I have a phone number for them, if you want it just pm me and I will give it to you. You can see what they reccomend to do. I apolagise for the million word post but hope this helps.

**firefitn** · 08-08-2008, 06:09 AM

Did you find out what is causing the vibrations/noise? I was looking on Ebay and going to purchase all 3 of them as well. How do you like the 12000K? How blue is it? Or should I go with the 10000k? How much did they all cost (hi,lo,fog)?

I have a 1999 Chev Camaro Z28, I cant find the number for the fog lights in the manual Does anyone know what the number is for the fog lights?

**illcul8troffcr** · 08-08-2008, 08:19 AM

Originally Posted by firefitn

Did you find out what is causing the vibrations/noise? I was looking on Ebay and going to purchase all 3 of them as well. How do you like the 12000K? How blue is it? Or should I go with the 10000k? How much did they all cost (hi,lo,fog)?

I have a 1999 Chev Camaro Z28, I cant find the number for the fog lights in the manual Does anyone know what the number is for the fog lights?

The color definitely depends on the manufacturer of the bulb or brand because a friend of mine got a particular brand and his 12000k looked pink where as mine are definitely a deep purple like it advertises its supposed to be.

Another thing if you are going to get all 3 sets of lights, GET mini ballasts!!! They do the same job and take up half the space. I like them when they work but I am trying to work out some issue with mine still.

I'd say go with 10k, I think I would if I could go back.. and the number for the foglight is 894, your highs and lows are 9005 and 9006

**illcul8troffcr** · 08-08-2008, 08:24 AM

Another thing.,You really don't need them in your highs too... People usually get HID's and they don't even need to use their highs anymore.. The only reason I got them all is because of the price I got them for all together. haha And if if I can't get the gremlins out of my car someone can have the damn things for $350 haha

**Mean Green Z28** · 08-08-2008, 08:27 PM

I like HIDs but if I do it I'm gonna go all the way and graft in some projector beams too 'cos I don't like the scatter with HIDs in conventional headlight housings.

**BirdCountry02** · 08-09-2008, 08:24 AM

i've been lookin for hid's cause i already have the sealed beam conversion, but i found a guy who's sellin the hid conversion for i think about $30 cheaper. names silviaman61336 on ebay. anyone here heard of him or used them?

**illcul8troffcr** · 08-09-2008, 12:28 PM

Originally Posted by BirdCountry02

i've been lookin for hid's cause i already have the sealed beam conversion, but i found a guy who's sellin the hid conversion for i think about $30 cheaper. names silviaman61336 on ebay. anyone here heard of him or used them?

97% feedback and only at 500 sells. He's racked up alot of negatives lately too and no shipping but taking peoples money.. look at peoples feedback !!