Results 1 to 13 of 13
Thread: BIG problem
-
11-14-2007, 07:26 PM #1
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
BIG problem
Alright so my dad and i just got done putting everything back together after having pulled the transmission to replace the rear main seal. we decided it would be a good idea to bleed the clutch as well since mine was sticking. While we were doing so my dad dropped the bleeder screw into the bellhousing!!!!! please tell me we dont have to completely undo everything we just did in order to get that bleeder bolt back out. is there another way? we tryed sticking a magnet through the hole were the starter is but we just couldnt drag it back up. does anybody have any ideas other than pulling the tranny back out? PLEASE HELP!!!
-
11-14-2007, 07:57 PM #2
well bro im sorry i think you gotta pull it back out i hate to tell you that but its a manual and does not have the inspection holes that an auto would have. tip-dont bleed it replace that muther
-
11-14-2007, 08:54 PM #3
get one of those three prong grabber things where you push the back and it opens up like claws if you know what i am talking about.
-
11-15-2007, 05:22 AM #4
Try a strong pen magnet(like a snap on). It might work, maybe. Or try fishing it with a magnet. Get a magnet and attach it to a string. . . . . . Maybe.
-
11-15-2007, 08:18 AM #5
ahhh!!!! get a high powered magnet and put it to the bottom of the bell housing and try to walk it up to the starter hole. it would neet to be a strong magnet and since the bell housing is aluminum it will move easy
-
11-15-2007, 09:32 AM #6
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
-
11-15-2007, 09:33 AM #7
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
-
11-15-2007, 09:43 AM #8
- Join Date
- Sep 2007
- Location
- P-Cola
- Posts
- 144
Black- 2002 Chevy Camaro
speaker magnet would probably work, or an angled welding magnet
-
11-15-2007, 09:44 AM #9
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
-
11-15-2007, 12:40 PM #10
- Join Date
- Feb 2006
- Location
- Orange County, NY
- Age
- 48
- Posts
- 2,693
always dirty- 2013 Ram 2014 Caddy ATS
get jenny mcarthey. if she can suck the chrome off a hitch she could surely suck it out.
-
11-15-2007, 05:28 PM #11
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
haha, ill look into that
-
11-15-2007, 07:08 PM #12
-
11-16-2007, 04:04 AM #13
- Join Date
- Jun 2007
- Location
- Florida
- Posts
- 238
Oriental Blue- 2001 Trans Am WS.6 M6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cluth problem??? transmission problem???? please HELP!!!
By adamblake97 in forum Manual TransmissionReplies: 3Last Post: 04-07-2014, 07:34 AM -
Obama's Woman Problem A Problem Of His Own Making
By Ed Blown Vert in forum Political / Debate ForumReplies: 0Last Post: 01-14-2013, 02:50 PM -
Fuel Problem or Severe Engine Problem
By pet_monk in forum General HelpReplies: 3Last Post: 02-18-2008, 07:51 AM -
Electrical/charging problem problem
By jchcomputers in forum General HelpReplies: 4Last Post: 02-23-2007, 05:59 AM -
is it a clutch problem, or a tranny problem?
By sgt0704 in forum Manual TransmissionReplies: 3Last Post: 01-07-2007, 04:03 PM
Bookmarks