Whats your mods and times?

[Corey1987]

As the title says, i just want a list of what mods people have and what times they have run with these mods. HP and Torq numbers would be good too. Thanks all.

[nhraformula]

volant cai
ls6 intake
LT headers
224/581 114 lsa cam
3000 rpm stall
subframe connectors
nitto 555r tires
tunung

[00maroz28]

slp flow-pac
borla cat-back and y-pipe
slp mass air sens.
13.22@106

[Fran D]

Lid, pulley, 4.10s, tuning on an '00 SS, 12.76@111.82.

[Rickys S/C Z28]

on the 93:TPIS ported heads and intake,LT4 cam,1.8 RRs, 52mm TB, mac mids,MSD 6AL box,K&N CAI,bilt trans runs 12:80s all day.
on the 2000" pacesetters LT,LS6 intake, ported TB, 42LB inj,and a P1SC S/C,when i get home from iraq ill be adding PP LQ9 heads with DG springs 60INJ,and a 232/240 .595/608 115 LSA BLOWER CAM and some tuning dont know what it runs YET!!!

[Corey1987]

Im glad this thread is finally starting to take off a little bit. This way when some1 wants to know what their car should run, instead of making a new thread, they can just check out this 1 and compare to what some1 else has.

[RagTop]

Basically a stock A4/2.73 car. I've got a lid, cutout and free mods. My quickest pass was 13.44 @ 105.75 mph. My fastest pass was 13.52 @ 107.43 mph. Not bad for a 2.73 rear end stocker with streets.

[Too Fast]

My best with my '98 TA AT 2.73 rear, with a lid, manually shifting at 6150 RPM was 13.65 @ 102.9. My '00 WS6 6-SPD with a lid and muffler has a best of 13.2x @ 107.5 3x and best ET of 13.17 @ 101 with a missed shift into 4th. 60 foot times near 2.0, 1.998-2.05.. Waiting for March, to see what my Hookers and ORY do for the 1/4. Hopefully 12s @ 109+ with good weather. I like this thread, to see what mods are done and the results. Dyno numbers are good, but the real numbers are at the drag strip!

[Corey1987]

i agree, i like dyno numbers but i like track times better.

[Corey1987]

anyone else??

[Rickys S/C Z28]

ttt i know there are more people here the mod there cars post up

[prietodogg]

I got pacesetters LT, SLP Lid and SLP MAF, 3.73 Gears Hit a 12.9 Reving the car now I need to get a shift kit >: )

[Firebirdjones]

I will have plenty to post with mods and track times coming, just have to wait for the weather to break. Still snowing here,,,,yuck. Larry.

[SSwt00SS]

K&N
SLP Lid
SLP Bellow
Ls6 Intake
Patriot Performance Stage II Ls6 ported heads
Comp Cam: 224/224 .581/.581 112lsa
Ls2 Timing Chain
Ls6 Oil Pump: ported and shimmed
Stainless Steel Long tube headers: AIR/EGR delete
Pacesetter 3" ORY
SLP Loud Mouth cat-back w/4"dia 22" long Magnaflow tips
Hurst Competition Plus 6spd shifter
Spohn Panhard Rod
Spohn LCA's
HP Tune
-------------------
409rwhp/388rwtq

et: gonna find out this spring...

[Rickys S/C Z28]

sweet!!!

[Mr. Luos]

Mine is stock.

11.97 at 118 (5800 feet above sea level)
531.1 RWHP

[1bad99ss]

i have a 99 SS m6 with a smooth bellow, lid, and SLP loudmouth 2 cat-back without a tune and i made 325rwhp and 337rwtq. not sure about 1/4 mile time because i live in ohio and the weather sucks...

[mplss]

See sig.

[Midnight02]

Bump for a great thread! It's really helpful to see everyone's numbers and mods.

I hope to make a few runs in the Spring and then I can contribute with the times.

[djvaly]

mods in my sig:
track time don't know, will hit the track in a few weeks
but... hehehhe I will go with ls2 402 stroker, full bolts on, tuned...