Stall Convertor. What size/What brand

**cubs1** · 05-06-2008, 07:55 PM

I have a stock 2002 Z-28. I have run 13.5 @ 104 with a 60' time of 2.0
I get great gas mileage and drive the car a lot.
What would be the best stall to put in that wouldnt hurt my gas mileage and would get me out of the hole.
What brand? And what Size stall?

**1fastcamarosss11** · 05-06-2008, 08:10 PM

any mods?

i would say 3000- 3,200.

a fuddle would be a good choice. (sponsor)

i had a 2800 on a bolt on car and went low 1.80's and high 1.70's 60ft.

**silverz28camaro** · 05-07-2008, 10:49 AM

sig.

**1fastcamarosss11** · 05-07-2008, 11:08 AM

1.60's 60ft. with a 2,800 seems hard to believe.

**MattD** · 05-07-2008, 12:17 PM

I can believe it with 3.73's and his stall.

**silverz28camaro** · 05-08-2008, 10:00 AM

Originally Posted by 1fastcamarosss11

1.60's 60ft. with a 2,800 seems hard to believe.

Its not 1.60, its 1.686 best. Usually 1.69-1.71

beleive it. Cars weight is 3400lbs with me in it

**fraz1le** · 05-08-2008, 06:22 PM

I believe it because I went 1.59 with a 4000stall and 3.23 gears. This was with only a lid tune and full exhuast.

**silverz28camaro** · 05-08-2008, 06:38 PM

I wouldn't lie about my stall, if i had a 3200 i would post it, actually i kinda wish i did go 3200 at least, maybe even a 3600.

Oh well, leaves room for improvement