Results 1 to 20 of 53
Thread: P1SC-1 Procharger
-
04-19-2008, 02:16 PM #1
- Join Date
- Mar 2007
- Location
- Mt. Airy, MD / Charlotte, NC
- Posts
- 124
- iTrader
- 0
Black- 2001 WS6
P1SC-1 Procharger
Used P1SC-1 Procharger Kit for 98-02 Trans Am
9 lb. pulley
Twin Intercooled
Not sure on exact miles. Last owner said it was recently installed when I bought it and I believe him because the belt was way too big and the car was not tuned for it. I have put about 8,000 miles since. Oil changed at 5,000 miles.
Often considered the cleanest blower setup. Hides the blower and intercoolers. Many people ask me where the blower is.
I am selling it to try a NA setup.
Located in Charlotte, NC until May, then Mt. Airy, MD
Kit Still on Car:
Intercoolers are located in the openings below the running lights/turn signals.
Brand New Owners Manual with Instructions from Procharger:
Kit Layed out as the instruction diagram shows:
Close Ups:
Clamps:
Intercoolers:
EDIT: Pics move to next post due to 15 pic rule.
Not Pictured: 42 lb. injectors included
One clamp was scratched up so I bought a new one to include.
All the bolts that hold the SC to the bracket are brand new.
The bolts that hold the intercoolers to the car are also brand new.
The filter has a small chip out of it where it rubbed something. Still fine to use. I have a pic but would not fit into the post. PM me if you want to see it.
Crank hub pulley has a chip out of the lip due to a 3 prong puller. I do not have pictures yet because it is not off the car. If you do not want it, take $100 off the price to get a new one.
Add $50 for a brand new never used Sport Comp 30/20 Boost/Vacuum Gauge
http://autometer.com/cat_gaugedetail...id=2845&sid=15
Easy to install, you just need to get some relocation brackets to move the air pump, cruise control and horn.
Price $4,300 obo shipped, well over $6,000 new.
PRICE DROPPED to 3950+ shipping. Needs to go NOWLast edited by Snowboardr18; 04-23-2008 at 04:55 PM.
-
04-19-2008, 02:17 PM #2
- Join Date
- Mar 2007
- Location
- Mt. Airy, MD / Charlotte, NC
- Posts
- 124
- iTrader
- 0
Black- 2001 WS6
Head Unit:
Head Unit Bracket:
-
04-19-2008, 04:24 PM #3
- Join Date
- Mar 2006
- Location
- West Virginia
- Age
- 45
- Posts
- 763
- iTrader
- 2 (100%)
Pewter- Y2K WS6
nice kit. Subscribing!
-
04-20-2008, 10:43 AM #4
- Join Date
- Aug 2007
- Location
- FLA
- Posts
- 249
- iTrader
- 0
maybe if i get my tax check back in time
-
04-20-2008, 07:04 PM #5
- Join Date
- Mar 2008
- Location
- Calgary,Alberta
- Posts
- 92
- iTrader
- 1 (100%)
good deal.
-
04-22-2008, 01:23 PM #6
- Join Date
- Apr 2006
- Location
- Lafayette, Indiana
- Posts
- 900
- iTrader
- 0
Pewter Metallic- 2002 Trans Am WS.6
free bump for a nice kit
-
04-22-2008, 01:33 PM #7
Snowboardr18,
What's different to install this on an 02 vette?
-
04-22-2008, 03:59 PM #8
- Join Date
- Oct 2006
- Location
- doylestown, Pa
- Posts
- 6,817
- iTrader
- 17 (100%)
SILVER- 2004 CTS-V
Where is the fan?
-
04-23-2008, 02:58 PM #9
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
- iTrader
- 5 (100%)
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
This is very tempting, but I'm going for the "sleeper" stock look...H/C/I...bump for a great kit and price.
-
04-23-2008, 05:06 PM #10
- Join Date
- Mar 2007
- Location
- Mt. Airy, MD / Charlotte, NC
- Posts
- 124
- iTrader
- 0
Black- 2001 WS6
I'm not quite sure, I will look into that later tonight.
The fan is included, I forgot to post the pics of it before.
This is one of the best sleepers you can have. You can't hear the blower at low RPM so almost everyone thinks it's almost stock. A lot of people can't find the blower when the hood is up at a show so I have to show them where it is.
PRICE DROP, THIS NEEDS TO GO IN NEXT FEW DAYS
-
04-23-2008, 05:32 PM #11
Ill Give U $1500 Its All I Have
-
04-23-2008, 06:15 PM #12
-
04-23-2008, 07:18 PM #13
- Join Date
- Aug 2005
- Location
- Winter Garden,Fla
- Age
- 51
- Posts
- 231
- iTrader
- 0
Lt Pewter Met.- 2000 SS
-
04-23-2008, 10:41 PM #14
-
04-24-2008, 12:12 AM #15
-
04-24-2008, 03:32 AM #16
- Join Date
- Aug 2007
- Location
- FLA
- Posts
- 249
- iTrader
- 0
Is this a auction now ? mmmmmmmm
-
04-24-2008, 12:03 PM #17
- Join Date
- Jan 2006
- Location
- Statesville NC
- Age
- 43
- Posts
- 108
- iTrader
- 0
white/Viper blue- 01 WS6
PM sent
-
04-24-2008, 12:32 PM #18
- Join Date
- Aug 2005
- Location
- Winter Garden,Fla
- Age
- 51
- Posts
- 231
- iTrader
- 0
Lt Pewter Met.- 2000 SS
I found out it's more than just the bracket.
-
04-24-2008, 01:07 PM #19
-
04-24-2008, 04:02 PM #20
- Join Date
- Aug 2007
- Location
- FLA
- Posts
- 249
- iTrader
- 0
I will go to 1575.50
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
used p1sc-2.. will it work?
By ls1fan00 in forum Forced InductionReplies: 1Last Post: 07-17-2010, 12:40 AM -
P1SC Procharger main bracket, and hardware
By 9t8z28 in forum Parts Wanted / TradeReplies: 10Last Post: 05-20-2008, 06:45 PM -
P1SC Procharger For 98-02 Camaro / Trans Am
By ls1bud in forum Parts For Sale / TradeReplies: 8Last Post: 10-24-2007, 08:56 AM -
Odered an ATI-P1SC-1 procharger yesterday
By ram air ws6 in forum Forced InductionReplies: 25Last Post: 09-21-2006, 05:21 PM
Bookmarks