Speed question

[jimmy09ss]

I have a 2000 camaro ss that is running 13.20's through the quarter mile. I've ordered 373 gears, Hooker long tube headers, and a hypertech programer. When i get those things done to it, what do you think it will be running?

[Silver Streak]

You'll prob drop .4-.5

[0rion]

auto or m6? Either way I'm gonna guess 12.6-12.9 I would be looking at a set of drag radials if you don't already have them.

[0rion]

auto or m6? Either way I'm gonna guess 12.6-12.9 I would be looking at a set of drag radials if you don't already have them.

[ss~zoso~ss]

you can say that again

[Firebirdjones]

Headers alone picked my car up a solid tenth,,,not eye opening but it helps. I think you will see most of your gains from the gear swap depending on what you started with,,,(2.73, 3.23 or 3.42's????)
I wouldn't expect any improvement with the Hypertech programmer, I have one of those and found it only good for fan and speedo corrections etc....it gave me nothing in the ET department.

In any event you should squeak a high 12 out of it with good conditions. May want some sticky tires, as gears worsen a traction problem. Hope that helps....

[Firebirdjones]

Orion, you beat me to it. I'm here typing and 2 posts show up before hand,,,,lol. Funny how our posts almost mimic each other...

[jimmy09ss]

Thanks! I've got a set of 15' in'' drag lites with some M\T ET Drag

[jimmy09ss]

What about a 100 shot of nos?? A whole sec maybe??

[RANSTRANSAM]

I have a 2000 camaro ss that is running 13.20's through the quarter mile. I've ordered 373 gears, Hooker long tube headers, and a hypertech programer. When i get those things done to it, what do you think it will be running?

HEY WHEN YOU GET ALL THIS STUFF YOU MIGHT BE ABLE TO HANG WITH ME

[0rion]

Orion, you beat me to it. I'm here typing and 2 posts show up before hand,,,,lol. Funny how our posts almost mimic each other...

I type faster.........younger hands.

[jimmybling31]

I have a 2000 camaro ss that is running 13.20's through the quarter mile. I've ordered 373 gears, Hooker long tube headers, and a hypertech programer. When i get those things done to it, what do you think it will be running?

sounds like it'll be pretty fun post with how it turns out

[JwMonE99]

I am assuming its a A4 because he went with the 3.73 gears.
So if it is auto I would suggest getting a stall converter.

[Firebirdjones]

I type faster.........younger hands.

Ooooof, I didn't expect that one,,,lol.