FS 98 Black Formula

**98formy** · 01-07-2008, 08:24 AM

I am putting the feelers out there right now before I buy a house. I will post some pics later because my computer is not cooperating right now.

It has 61xxx miles right now and mods are as follows:

FTRA ram air intake
SLP lid
SLP smooth bellows
BBK 80mm TB
Ls6 intake
TR 224/224 .563/.563 114LSA cam
Crane dual springs with titanium retainers
stainless steel headers with ORY
Magnaflow catback
Fuddle 3400 stall converter
3.73 Motive gears with rebuilt rear end at same time
new alternator
SFC's and LCA's
adj panhard bar
strut tower brace
Eibach front/rear sway bars
HID headlights
Blue interior instrument lighting
Viper alarm with keyless entry
stealth sub box with woofer
T-Tops
All power accesories and air
No traction control
AR TTM rims with fuzion ZRI's (negotiable with sale)
will come with factory rims with blizzak revos regardless
Most of the stock parts can go with car if you choose.

The body is in great shape, couple minor door dings and one bigger dent on the driver side lower part of quarter panel just after the door. Its noticable up close, but from a distance, barely see it. The paint is not oxidized and very nice and the interior is always kept clean with no fabric tears or plastic cracks. I have had since 38000 miles and all maintenance has been done on time and oil always changed with synthetic. One big thing is rust is just beginning underneath the car in some places. Its not bad and easily repairable. I just hate the salt we use up here. I live in the twin cities metro in Minnesota and may be willing to travel a certain distance for delivery.
It dynoed out at 364rwhp and 355 rwtq and have the sheet. I am not sure what it runs in the 1/4 mile, but my guess is very low 12's or high 11's.

Asking price 12,500

**98formy** · 01-07-2008, 03:48 PM

This one is a little older, before the gauges

**98formy** · 01-11-2008, 05:01 AM

ttt

**just1news6** · 01-11-2008, 06:01 AM

clean car

**98formy** · 01-18-2008, 05:13 AM

ttt

**FasstChevys** · 01-23-2008, 10:24 AM

TTT for ya, nice ride

and at 364 rwhp, I'd guess mid 12's. Good luck!

**stealthram92z** · 02-18-2008, 08:00 PM

any trades

**98formy** · 02-19-2008, 05:18 AM

no, but thanks for the offer. I need the cash more than anything.

**95Fyrebyrd** · 02-19-2008, 06:29 PM

where indeed did you get those gauges cause those are sik.

**98formy** · 02-21-2008, 05:27 AM

Heres the gauges.http://procarparts.stores.yahoo.net/chevrolet2.html There are also some other options

Heres the needles.http://www.streetbeatcustoms.com/ussned006.html You do have to drill out the holes very slightly to fit them on the shafts

I also switched out to blue leds in the headlight switch, stering wheel controls,hvac controls, and the shifter console