Results 1 to 9 of 9
-
08-11-2005, 11:58 PM #1
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
Fiberglass Sub Box with side panels for sale
I am posting this in a thread by itself because I have already sold everything else from my system. This box will fit any 93-02 Camaro or Firebird. The box takes up the entire hatch area, and is made to fit one 15" subwoofer and an orion 2500D. You can also fit a small amp below the orion amp and a battery in one side if you would like. The box is around 4.25-4.5 cubic feet and is ported. The port is removable for spl. The first tuning is 34 hz, and the second tuning is 45 hz. The port area goes from 40 square inches to around 100 square inches when the port is removed. The box is very light for its size, as the majority of it is fiberglass. The fiberglass is about 8 layers thick, made to handle the toughest of speakers. I had a Resonant Engineering XXX 15 in the box. I am looking to get $750 plus shipping for it. Local pickup is definantly preferred due to the weight. I am either in Southwest Louisiana or Baton Rouge, Louisiana. I usually move around back and forth. Here are some pictures:
And here are some pictures with the gear removed:
I also have a Planet Audio VX3002. It does 300x2 at 2 ohms, 600x1 at 4 ohms bridged, and 150x2 at 4 ohms. It has only been used for about 4 months. I would like to get $150 shipped for it. This is a very nice amp. Here are some pictures of it:
Edit: Got the pics working again.Last edited by 02BlackOnBlackSS; 08-12-2005 at 12:57 PM.
-
08-12-2005, 11:30 AM #2
- Join Date
- Aug 2005
- Location
- Buda Tx South of Austin
- Age
- 50
- Posts
- 218
- iTrader
- 0
Artic White- 2000 SS Camaro M6
Nice man ...but i couldnt lose my whole hatch area...ttt for you though
-
08-13-2005, 10:09 AM #3
- Join Date
- Aug 2005
- Location
- Lexington park, Maryland
- Age
- 53
- Posts
- 28
- iTrader
- 0
RED/ with silver stripes- 2002 Chevy Camaro SS 35th
go to say that pretty bad azz, wish I was in the states!!!!!
good luck, going to much someone happy with some great sounds!!!
-
08-16-2005, 05:51 PM #4
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
Bump.
-
08-21-2005, 10:03 PM #5
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
Bump.
-
08-26-2005, 03:13 PM #6
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
-
08-29-2005, 07:58 AM #7
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
Bump
-
08-31-2005, 09:54 AM #8
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
2 Days left
-
09-01-2005, 08:49 AM #9
- Join Date
- Aug 2005
- Location
- Baton Rouge, LA
- Age
- 39
- Posts
- 22
- iTrader
- 0
Bump.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need advice on peeling clearcoat on fiberglass panels
By qwik219d9 in forum Appearance SectionReplies: 3Last Post: 11-02-2014, 08:55 AM -
where to get fiberglass body panels?
By Chirodan in forum Classic MuscleReplies: 3Last Post: 01-25-2006, 08:32 PM -
Fiberglass Sub Box with side panels for sale in Louisiana
By 02BlackOnBlackSS in forum Southern MembersReplies: 0Last Post: 08-12-2005, 12:00 AM
Bookmarks