Results 1 to 3 of 3
Thread: important question!!!!!
-
09-12-2007, 12:44 PM #1Member
- Join Date
- Dec 2006
- Location
- doylestown, ohio
- Age
- 42
- Posts
- 105
red- 99 camaro SS
important question!!!!!
i have a 99 ss m6 and i need a block. well i came across block for really cheap and im wondering if it will work with my heads, intake and everything else. these are his words " its an 86 350 with 4 bolt mains, passenger side dipstick, forged internals". i dont know much about the older 350 blocks but id like to know if i can use my heads and intake..........replies will be greatly appreciated.
-
09-12-2007, 01:49 PM #2Exalted Cyclops
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,822
2002 Z28 A4 NBM- Sadly now demodded :(
I think we've (the forum that is) been down this road before. Nothing from a Gen I SBC will interchange with a Gen III SBC. Even the bell housing pattern is different. The only similarities are the bore spacing at 4.40".
That block would be perfect for a 3rd gen or earlier.
-
09-12-2007, 02:35 PM #3Member
- Join Date
- Dec 2006
- Location
- doylestown, ohio
- Age
- 42
- Posts
- 105
red- 99 camaro SS
ahhh i see......i kinda figured that but it never hurts to ask. thanks!
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
A very important question to ya'll
By Musclefan21 in forum Almost Anything GoesReplies: 23Last Post: 01-07-2008, 10:17 AM -
Important Cam question
By TransAmcoupe98 in forum Internal EngineReplies: 12Last Post: 09-06-2007, 04:41 PM -
Important SLP Loudmouth Question
By joliver2 in forum Camaro / SSReplies: 16Last Post: 05-03-2007, 01:32 PM -
important stereo question! ls1 ss
By 1bad99ss in forum Stereo and ElectronicsReplies: 1Last Post: 03-23-2007, 11:18 PM -
very important rear end and ring and pinion question!!!
By 1bad99ss in forum DrivetrainReplies: 9Last Post: 02-27-2007, 08:11 PM
Bookmarks