Results 1 to 8 of 8
Thread: Remote bleeder for clutch
-
04-05-2007, 11:09 PM #1Junior Member
- Join Date
- Jan 2006
- Location
- Tampa, Fl.
- Age
- 65
- Posts
- 11
- iTrader
- 0
Black- 2002 WS6
Remote bleeder for clutch
I am making remote bleeders for the clutch. With this bleeder you can run it up to the engine compartment or out under the car to bleed the clutch. It also has a speed bleeder on the end so it's a one man operation to bleed the clutch. I am only getting top of the line parts to make them. One of the problems with making them is getting the fitting for the slave cylinder that will seal and not leak since it's not a machined surface. I have found what they call a bonded washer that will seal under high pressure to use on the fitting. I also have found a sealant to use on the threads that will not break down from the brake fluid. This provides a double seal for the fitting. I will be selling them for $75 with Free Shipping. Here's some pictures of it installed.
-
04-08-2007, 01:26 PM #2Member
- Join Date
- Dec 2006
- Location
- georgia
- Posts
- 376
- iTrader
- 1 (100%)
black- 1998 pontiac trans am
so this stays mounted all the time?
-
04-08-2007, 02:30 PM #3Junior Member
- Join Date
- Jan 2006
- Location
- Tampa, Fl.
- Age
- 65
- Posts
- 11
- iTrader
- 0
Black- 2002 WS6
Yea it does. You just put the line up out of the way when you don't need it.
Last edited by black2002ws6; 04-08-2007 at 02:36 PM.
!Ram Air Baffles, MTI smoke lid, Thunder Racing MAF ends, SLP smooth bellows, MAFT, Custom Tuning by LPP, !CAGS, Last of the Breed badges, LPP headers and Tru-duals. Hurst Billet Plus Shifter.
-
04-08-2007, 02:41 PM #4Member
- Join Date
- Dec 2006
- Location
- georgia
- Posts
- 376
- iTrader
- 1 (100%)
black- 1998 pontiac trans am
i guess i'll need one when i get to that part of putting my car back together when im done with my rebuild. PM me mailing info and when i get close to that point i'll send ya the money
-
04-08-2007, 03:43 PM #5Junior Member
- Join Date
- Apr 2006
- Location
- San Bruno
- Age
- 42
- Posts
- 32
- iTrader
- -1 (0%)
Blac & silver- 2000 ss camaro
will this prevent my camaros clutch pedel from sticking to the floor after getting on it on the freeway. It takes like 30 secs plus to have it come back top normal hight.THANX
-
04-08-2007, 04:45 PM #6Member
- Join Date
- Dec 2006
- Location
- georgia
- Posts
- 376
- iTrader
- 1 (100%)
black- 1998 pontiac trans am
when my clutch pedel was weak, my slave cylinder was bad. have to take tranny off to get to it. might not be your prob though
Originally Posted by chad2000ss
-
04-08-2007, 04:47 PM #7Junior Member
- Join Date
- Apr 2006
- Location
- San Bruno
- Age
- 42
- Posts
- 32
- iTrader
- -1 (0%)
Blac & silver- 2000 ss camaro
Thanx for the info. It only happens when i get on it on the freeway. Originally Posted by rbrtlux
-
04-08-2007, 05:01 PM #8Member
- Join Date
- Dec 2006
- Location
- georgia
- Posts
- 376
- iTrader
- 1 (100%)
black- 1998 pontiac trans am
you need to post your problem under the proper forum. you will get more replys to possibles problems and fixes. Originally Posted by chad2000ss
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
need to know where the bleeder for the clutch is
By Big D Squared in forum General HelpReplies: 4Last Post: 07-17-2012, 01:29 PM -
tick performance remote speed bleeder line
By turyg ls1 in forum Manual TransmissionReplies: 6Last Post: 02-20-2011, 10:49 PM -
clutch alignment install tool and speed remote bleeder
By disc0monkey in forum Parts Wanted / TradeReplies: 1Last Post: 11-05-2010, 01:58 PM -
no bleeder screw
By ssweet99ss in forum Manual TransmissionReplies: 4Last Post: 08-05-2008, 06:38 AM -
What's a Miti vac clutch bleeder, and where...
By Gnobility in forum Manual TransmissionReplies: 5Last Post: 01-07-2007, 08:14 PM
Bookmarks