CF fuel rail cover?

**turbols1chick** · 02-18-2007, 07:35 PM

has any one had any experiance with the carbon fiber fuel rail covers? i was thinking of purchasing them and i know that they say its for a c5 so i was wondering if we need to cut or make it fit better like the custom FRC. but i dunno anyways just wondering oh and to add one more thing in here does any one know how well the lunati voo doo cam performs? thinking of getting that too thanks for any help!

**Y2KPewterSS** · 02-18-2007, 08:54 PM

If they are made for C5's, they would need to be cut to fit a TA.

I also fixed the typo in your title for you

**turbols1chick** · 02-19-2007, 07:34 AM

hey thanks! i never proof read thank you for your help!

**T/AKing** · 02-19-2007, 09:20 AM

where can u find these im curious to see how they look. where do they have to be cut??

**Mr. Luos** · 02-19-2007, 09:21 AM

I can only imagine the cost.

Can't be worth it in my opinion.

**T/AKing** · 02-19-2007, 09:36 AM

so which covers can you buy that fit the T/A????

**Mr. Luos** · 02-19-2007, 09:38 AM

Their are custom made ones out there.
I can't remember the link or where from.

They were custom fit to the F-Body and had "Trans Am" instead of "Corvette" lettering.
$200 for the pair....

**turbols1chick** · 02-19-2007, 11:00 AM

http://www.pfyc.com/store/merchant.m...ct_Code=VT3066

This is the link that i found the cf ones. for the custom frc came the price come to around 300 when i was done priceing them out for myself with all the stuff i wanted. those are one afterthoughtsauto.com

**Mr. Luos** · 02-19-2007, 11:06 AM

I think the covers look clean as long as they don't have the "Corvette" lettering on them.
Just a stupid thing of mine.

My car isn't a Corvette.

I don't think I could fit covers on mine anymore though. Aftermarket fuel rails.

**PontiacFan** · 02-19-2007, 11:11 AM

I used to make these custom covers also, ..., but they are very labor intensive.
Commonly sold for $235-255.
I am going to start another 1/2 dozen sets this spring as soon as it warms up a bit.
3 pages of sample here, ...
http://rides.webshots.com/album/265016994MLlQBz
I simply did it as a wekend hobby thing, but it was so much work it really wasn't worth it.
Now the LS1 Head Plates I make are much less labor intensive, as I can have a lot of the work contracted out, & simply finish them at home.
Couple samples here, ...
http://rides.webshots.com/album/555072451iEtjkO

Be careful with the carbon fiber units. Most of them have to be attached to the factory covers, so you have to buy them also. Most of the CF ones don't have the clips necessary to mount to the fuel rail.

**Mr. Luos** · 02-19-2007, 11:18 AM

Originally Posted by PontiacFan

Now the LS1 Head Plates I make are much less labor intensive, as I can have a lot of the work contracted out, & simply finish them at home.
Couple samples here, ...
http://rides.webshots.com/album/555072451iEtjkO