Results 1 to 19 of 19
Thread: HSW dry came in
-
12-27-2006, 04:21 PM #1
HSW dry came in
today was a joyfull day..........my kit came in........which is great beside my clutch slipped bad chrismas night and i could smell it burning and i dont wanna spray it till i get that fixed............anyway im going to hide the hole kit....everything..........no wot switch going with a tps......my goal is to have ppl lift the hood and not see a single thing....and i know how im going to do thanks to a link thread on ls1tech..........anyway all i got was the basic kit...i will order my heater, tps, and window switch next week........all i had time for today was building the bracket for them bottle....tomorrow i will run the lines and do everything other than wiring.......
Last edited by craz1469; 12-27-2006 at 04:33 PM.
-
12-27-2006, 04:31 PM #2
- Join Date
- Jul 2006
- Location
- Glen Carbon, IL
- Age
- 45
- Posts
- 397
Silver- 2000 Camaro SS
-
12-27-2006, 04:34 PM #3
thats why i picked it over wet
2002 Chevrolet Camaro Z28 m6
SLP LoudMonth, SLP CAI, SLP MAF, Hotchkis SFC
12.76 @109 1.96-60ft
-
12-27-2006, 04:58 PM #4
good job. i would raise the bottle up more though. not high enough and when you start using up the bottle, you may run into flow issues.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
-
12-27-2006, 05:05 PM #5
i thought about putting some 1/2 inch spacers under the front mount
-
12-27-2006, 05:07 PM #6
try to get it to 45* at least.
-
12-28-2006, 10:28 PM #7
-
12-29-2006, 06:04 AM #8
- Join Date
- Aug 2005
- Location
- Warminster, PA
- Posts
- 227
Looking good so far!
Matt
-
12-29-2006, 01:01 PM #9
http://www.ls1tech.com/forums/showth...en+nitrous+kit
just like this but with my bottle in the wheel well
-
12-29-2006, 01:03 PM #10
you sure that is close enough to the MAF to work right on a dry set up?
-
12-29-2006, 02:34 PM #11
im putting mine as close as possible...........HSW says between 6 to 12in of maf
-
12-29-2006, 04:21 PM #12
need it right about where the IAT is in the lid. mine is just before the neck and i didn't get best results.
-
12-30-2006, 05:18 PM #13
IAT? these fucking acronyms drive me crazy, i got one for you AFA...
for real, where exactly did you put it? what is the IAT ? is that the thing that 98-99 doesnt?>
-
12-30-2006, 06:28 PM #14
-
12-30-2006, 06:40 PM #15
- Join Date
- Jul 2006
- Location
- Glen Carbon, IL
- Age
- 45
- Posts
- 397
Silver- 2000 Camaro SS
IAT= Intake Air Temperature sensor...
I'll try and take a few pics of my install. I didn't want to do any drilling, so my bottle is mounted inside a bag behind the rear seat.
-
01-01-2007, 07:07 PM #16
what happens when ur in an accident and someone hits u in the rear quarter????? KAAA BOOOOOMMMMM. That is the last place I would put my bottle if I was planning on using the car on the street. Who cares if it's hidden, it's not like u can reace all night on the street on 1 bottle, eventually u will come to a red light with someone to race, and have no gas left. Everyone is running the juice these days no need to hide it.
-
01-02-2007, 03:20 PM #17
1 bottle will last more than one night....plus if i know i can beat them without it im not going to use it.....im lucky if i can get 2 races in one night..........not everyone is running it......everyone is holding something back that they have done to there car.........this is mine
-
01-02-2007, 03:28 PM #18
lasting all night depends on how many races you actually get involved in. oh and the whole kaboom thing, he'd have to get REALLY hard to even try and rupture the bottle.
-
01-04-2007, 07:01 AM #19
Thats where my bottle is. The bottle lasts longer than you think.
http://i88.photobucket.com/albums/k1...98Camarod3.jpg
241's l Comp XER 230/230 Cam l SS4000 l Juice
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks