LS1.com Appearance Museum

[Y2KPewterSS]

!Wire mod
Converting interior lights to LEDs
!Side Molding
CETA mod
Berger panel lighted up
How to light up the front bird
Converting steering wheel controls to blue lights
Installing a billet grille
Prepping and painting your FAST intake
Changing your shift knob, automatic transmissions
Changed my shifter and added shift boot
Boot for emergency brake
Installing fuel rail covers(FRC's)
Painting the back of the headlights
Custon LED turn signals for F-Body mirrors
Painted bumper support
Ominous Glow Write-up for the SS hood
Relocating your fuse boxes
Refinishing your sunvisors
Relocating cruise module
Painting brake calipers
Nice Stock Grill Insert

Polishing your Camaro headlights
HID upgrade


!=removal

[third_shift|studios]

wicked-cool thread

[01SOMSS!]

sweet

[LETHALxLS1]

LOL with my luck my car would never run again!!!!hahaha (from the wire mod)

[greatwhiteZ28]

good wright up on the side moldings, i might actully do it

[sharptransam]

...why blue lights? never figured out the cool thing with blue.

[IT_SS]

Any body know where to find ls1 valve covers??

[LETHALxLS1]

Ebay if you are looking for stock ones.

[atvtech1]

I just started converting my lighting over to blue LED's, my car is blue as well.
I got my door trim lights, steering wheel controls, shifter, headlight switch and TCS switch done too. next is cluster. I used camaro parts to rid myself of the red.
I just got my HVAC finished, my temp control still lights red though unlike most. I sectioned the acrylic panel into 3 sections and put blue LEDS in certain spots to light up the face evenly but behind the hot zone of the temp control I used a red LED and blocked the sections from bleeding light through to each other. now when I turn the knob it changes from blue to red as I get past 1/2 way and gets redder the hotter I turn it cause the led is at the bottom. sorry for the crappy phone pic, the lighting is more even and not as bright as it appears in this pic but you get the idea.

[Y2KPewterSS]

Updated

[JoshieDoom]

I didnt even know my steering wheel controls had lights until reading this. I wonder why mine are out..

[LETHALxLS1]

I didnt even know my steering wheel controls had lights until reading this. I wonder why mine are out..

because they are broken




















J/K man! hahaha

[JoshieDoom]

Haha. I think im just buy the whole unit becuase the buttons are really crappy on both of them.

remember im from ky!!!!!!!!!!!!!

[LETHALxLS1]

well I lived in alabama for years so I can relate! hahaha

[Y2KPewterSS]

Updated, thanks Randy

[suede]

I just started converting my lighting over to blue LED's, my car is blue as well.
I got my door trim lights, steering wheel controls, shifter, headlight switch and TCS switch done too. next is cluster. I used camaro parts to rid myself of the red.
I just got my HVAC finished, my temp control still lights red though unlike most. I sectioned the acrylic panel into 3 sections and put blue LEDS in certain spots to light up the face evenly but behind the hot zone of the temp control I used a red LED and blocked the sections from bleeding light through to each other. now when I turn the knob it changes from blue to red as I get past 1/2 way and gets redder the hotter I turn it cause the led is at the bottom. sorry for the crappy phone pic, the lighting is more even and not as bright as it appears in this pic but you get the idea.

You should really post up some pictures of how you did this....

[Y2KPewterSS]

Updated

[Z28boy2000]

call me crazy but what is the side molding...i see the pics but i cant tell whats been taken off

[Y2KPewterSS]

call me crazy but what is the side molding...i see the pics but i cant tell whats been taken off

Look down the middle of the door. The molding in the middle is now gone.

[Z28boy2000]

Look down the middle of the door. The molding in the middle is now gone.

yeah i got it now...i was looking for something that would be on my car but mine is already gone.

was this on all stock T/A's & Camaro's