Results 1 to 9 of 9
-
07-04-2013, 09:05 AM #1
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
What lubrication would you use for a throttle body?
Not on my LS1, but it should apply to any TB.
My TB on my 98 Jeep GC is sticking alittle, I'm going to clean it and was wondering what I should use to lubricate the moving parts.
Any suggestions?
-
07-04-2013, 11:23 AM #2
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 3,111
Silver & Blue- 02 Camaro SS, 04 GTO
I use white lithium grease. Just make sure you clean the TB correctly and do a good job at the blade mount.
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k
-
07-04-2013, 11:42 AM #3
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
Cleaning will be thorough, I'm going to take it off.
-
07-04-2013, 07:05 PM #4
I never put any lubricant on my TB's. I do remove it and clean it real good. The main thing is to make sure the blade moves easy and that it has tension from the spring. I don't think some lubricant will hurt but don't put a lot of it.
-
07-05-2013, 09:03 AM #5
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
Will do, thanks guys!
-
07-05-2013, 04:05 PM #6
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I could be wrong, but I believe throttle body cleaner has lubricant in it. Spray the TB, wipe it down real good and you should be good to go.
-
07-05-2013, 05:12 PM #7
- Join Date
- Aug 2007
- Location
- Corn and Soybean fields
- Posts
- 5,483
Gray/ White- 09Ram 1500 83 Thunderturd
The sticking you're feeling is the build up in the tb. Give it a good scrub and sticking will be gone. No lubrication needed
-
07-07-2013, 03:07 AM #8
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
I sadly still haven't done this.
I was going to soak it in parts cleaner, but TB cleaner will suffice?
-
07-07-2013, 12:40 PM #9
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
No need for parts cleaner.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
4.8 Timing chain lubrication
By GMJim in forum Internal EngineReplies: 5Last Post: 12-27-2015, 10:22 AM -
throttle body
By fastlt196 in forum LT1Replies: 0Last Post: 03-24-2009, 03:20 PM -
Which Throttle Body??? S3 vs. BBK
By 99blueZ in forum External EngineReplies: 19Last Post: 10-11-2006, 04:19 PM -
Lubrication Points
By Shatterz in forum General HelpReplies: 2Last Post: 04-20-2006, 08:40 PM -
98-02 stock LS1 f-body throttle body
By noblesramair in forum Parts Wanted / TradeReplies: 2Last Post: 03-04-2006, 05:59 PM
Bookmarks