Results 1 to 9 of 9
  1. #1
    **Te@M fBoDy** fbodyNATION's Avatar
    Join Date
    Nov 2010
    Location
    The Woodlands,Texas...N.O.
    Posts
    1,016

    Pewter Metallic
    2000 Pontiac Trans Am WS6

    Stock WS6 VS Stock 5th Gen SS

    What are the chances of a stock WS6 with an auto trans winning a race against a stock 5th gen SS with an auto trans? I know there are weight & horsepower differences,but which car would win in a 1/4 mile

  2. #2
    Senior Member redbird555's Avatar
    Join Date
    Mar 2009
    Location
    pompano beach florida
    Age
    34
    Posts
    1,008
    2002 Camaro Z/28 Pewter

    the ws6 should take the auto ss no problem, theyre dogs with the stock tune. but if he has a tune they do run pretty well lol still not overly impressive though

  3. #3
    **Te@M fBoDy** fbodyNATION's Avatar
    Join Date
    Nov 2010
    Location
    The Woodlands,Texas...N.O.
    Posts
    1,016

    Pewter Metallic
    2000 Pontiac Trans Am WS6

    i like the SS from the outside but I dont like the interior i really dont like how the dash looks,i dont know how the ball was dropped on the SS i think the SS should have been more faster since it was making a comeback,but i'd like to see both raced

  4. #4
    **Te@M fBoDy** fbodyNATION's Avatar
    Join Date
    Nov 2010
    Location
    The Woodlands,Texas...N.O.
    Posts
    1,016

    Pewter Metallic
    2000 Pontiac Trans Am WS6

    Quote Originally Posted by redbird555 View Post
    the ws6 should take the auto ss no problem, theyre dogs with the stock tune. but if he has a tune they do run pretty well lol still not overly impressive though
    u think the SS would catch up with the WS6 after it finally picks up enough speed?

  5. #5
    Member
    Join Date
    Nov 2009
    Location
    bernaillio county
    Posts
    292

    navy blue
    2002 camaro ss

    All things being equal as stated above the ws6 wouldnt win. At least not in the quarter mile. Maybe on the launch but after the heavier ss gets rolling it will over power the ws6 within the quarter mile. The ss has bigger engine and alot more torque

  6. #6
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Florida Man Status Acheivement
    Posts
    11,808

    Navy Blue Metallic
    98 T/A, 00 FBVert, 78T/A

    Slimss is right.



    I've got a M6 and even with my mods (and I have more stuff then a WS6 does) I had a 5th Gen SS walk on me all the time at the track. I was even out the gate twice before he was and he still overtook me.

    They may be bricks but they do have some balls too.

    Not sure how someone would do going at them from a roll.


    No I'm not saying a mod out LS1 couldn't take one on but my answer is for the question he asked. stock vs stock.

    4th gen - LS1 TA weighs about 3600 without driver and stock rated power 310-325 HP

    5th gen - LS3 SS weights about 3750 without driver and stock rated power= 376 HP
    http://www.ls1.com/forums/f7/my-6-liter-build-174257/

    http://www.ls1.com/forums/f8/my-8-8-rear-build-165553/

    6.0L Block - Forged 403ci , Polluter Stg3 Cam, FAST 102mm Intake, NW102 TB, MSD wires, NGK TR6 plugs, Truck Coil Packs, LS3 Fuel Injectors, CC Pacesetter LT Headers, TS&P ORY, QTP e-Cutout, Magnaflow Muffler, 104mm Air Lid & Line Lock, Catch Can, Stage 2 T56 w/Viper shaft, PRO 5.0 Shifter, Tick MC, SPEC Stg3+ Clutch, QT SFI BH, MWC DSL, Full UMI Performance Suspension, Viking Coilovers, YR1 Snowflake Wheels wrapped in NT555 tires & Custom Fab Ford 8.8 rear w/Wavetrac Diff 3.93 Yukon Gears, WSQ Hood, 3"CM Strange Eng Drive Shaft.

    00 FB Vert - "Stockish" Belstein Shocks, Hotchkis Springs (1" Drop), C7 Snowflake 17" Wheels

    78 FB - Just getting started......

    Horsepower never lies, but is often lied about!

  7. #7
    Senior Member 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Alabama
    Posts
    3,625

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Quote Originally Posted by SMWS6TA View Post
    Slimss is right.



    I've got a M6 and even with my mods (and I have more stuff then a WS6 does) I had a 5th Gen SS walk on me all the time at the track. I was even out the gate twice before he was and he still overtook me.

    They may be bricks but they do have some balls too.

    Not sure how someone would do going at them from a roll.


    No I'm not saying a mod out LS1 couldn't take one on but my answer is for the question he asked. stock vs stock.

    4th gen - LS1 TA weighs about 3600 without driver and stock rated power 310-325 HP

    5th gen - LS3 SS weights about 3750 without driver and stock rated power= 376 HP
    I thought the ls3 was rated at 430hp or are you referring to rwhp?
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  8. #8
    Veteran Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,557
    I've raced 2 of them, both 6 speeds. One was a bone stocker back when the first new models cam out so that one has been a couple years,,and I could run away from it, we only went through a couple gears on the street.

    The second one was at a local Fbody track day more recently,,,he had a brand new one with a paxton installed blowing about 12psi. It was a 6 speed and other than the blower, custom tune, it was stock. We lined up 3 times and ran heads up. I beat him all 3 times but he was running me down quickly on the big end. Running 13.30's at 118 mph where as I was running high 12's at 111 mph that day. Both of us on stock street tires,,,he was babying it out of the hole because the 2 previous track events he broke his rear half shafts both times. I was sort of being easy on mine with the stock 10 bolt and only cutting 2.0 60 foot times, but he was doing even more so, and by the time he got moving I was out 4-5 car lengths He had to run me down and just couldn't get there in time. It's obvious he had the more powerfull car that day,,,but just couldn't exploit it.

    Wifes car is an SS 6-speed with an LS6 cam and headers,,,that's it.

    In a nut shell,,,run what ya want and don't worry about it,,,,anything can win on any given day.
    Last edited by Firebirdjones; 08-28-2012 at 05:09 AM.

  9. #9
    Member
    Join Date
    Nov 2009
    Location
    bernaillio county
    Posts
    292

    navy blue
    2002 camaro ss

    Basically the 5th gen camaros run on average 12.99 to 13.3 The ls1 cars run on average 13.2 to 13.6 so yes with so many variables any car could win on any day. But overall the 5th gen camaros are quicker cars. More hp and more torque than the ls1 cars.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stock headers, stock (GM) cats, y pipe custom fitted for LM1
    By az gt eater in forum Parts For Sale / Trade
    Replies: 2
    Last Post: 11-20-2011, 08:26 AM
  2. Replies: 13
    Last Post: 10-11-2007, 12:48 AM
  3. FS: Stock 4-16x8 polished rims w/ stock eagle tires
    By Long Beach in forum Parts For Sale / Trade
    Replies: 4
    Last Post: 01-24-2007, 10:11 PM
  4. FS: Stock 4-16x8 polished rims w/ stock eagle tires
    By Long Beach in forum Western Members
    Replies: 1
    Last Post: 01-24-2007, 09:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •