need help matching parts!!!!!

[soljhaboy2c]

i already have these parts in my possession, comp cams hydraulic roller lifters, comp cams 277/281 extreme cam, fast 90mm intake and tb, with fast fuel rails, ls6 heads stage 1 ported, and comp cams roller rockers. i just need some feedback on whether or not the stock valvetrain will work with this setup before i go and throw all of this stuff in next week. someone help me out please. oh my the way its all going in my 98 trans am, ls1, 6 speed auto.

[soljhaboy2c]

ok the cam is 224int/228exh @ .050, 112 sep. .534int/.537exh valve lift

[Redphoenix1998]

Get a set of matched hardened pushrods, when assembling the motor, find out the length and buy the right set. THe stockers will bend and break. Also look into a set of comp 918 dual valve springs, always a safe bet. You'll also need at least a 255 fuel pump and 30# injectors with some good tuning to get the power from this cam.