CAM LIST !!!! Help plz 6.0 H/C

[al3flangy]

Hi

I have camaro ss 2000 m6

Heads afr 64cc
6.0 Iron block (stock bottom)
Intake manifold 92 with ford injectors (green clr)
TB 92
Cold air intake
Hooker longtube headers

Everything are good but i want a better cam !!!!!!!!!!!!!!!!!

Someone gave me these cam list but i dont know how i decied which one is better for my modification ??? I WANT a MONSTER CAM !!!!

LS Hydraulic Roller Camshaft; 246'/252', .629"/.629", 114'+4'; 3,200 to 7,200 RPM
dum
LS Hydraulic Roller Camshaft; 246'/252', .646"/.646", 112'+4'; 3,200 to 7,200 RPM
dum
LS Hydraulic Roller Camshaft; 252'/260', .629"/.629", 112'+4'; 3,500 to 7,500 RPM
dum
LS Hydraulic Roller Camshaft; 252'/260', .646"/.646", 110'+4'; 3,500 to 7,500 RPM

................................
LS Hydraulic Roller Camshaft; 232'/236', .595"/.595", 114'+4'; 2,400 to 6,400 RPM
dum
LS Hydraulic Roller Camshaft; 232'/236', .629"/.629", 113'+4'; 2,400 to 6,400 RPM
dum
LS Hydraulic Roller Camshaft; 232'/236', .646"/.646", 112'+4'; 2,400 to 6,400 RPM
dum
LS Hydraulic Roller Camshaft; 236'/240', .612"/.612", 114'+4'; 2,800 to 6,800 RPM
dum
LS Hydraulic Roller Camshaft; 236'/240', .629"/.629", 113'+4'; 2,800 to 6,800 RPM
dum
LS Hydraulic Roller Camshaft; 236'/240', .646"/.646", 112'+4'; 2,800 to 6,800 RPM
dum
LS Hydraulic Roller Camshaft; 240'/246', .612"/.612", 114'+4'; 3,000 to 7,000 RPM
dum
LS Hydraulic Roller Camshaft; 240'/246', .629"/.629", 113'+4'; 3,000 to 7,000 RPM
dum
LS Hydraulic Roller Camshaft; 240'/246', .646"/.646", 112'+4'; 3,000 to 7,000 RPM

........................................

LS Hydraulic Roller Camshaft; 220'/224', .544"/.544", 114'+4'; 1,700 to 5,700 RPM
dum
LS Hydraulic Roller Camshaft; 220'/224', .561"/.561", 113'+4'; 1,700 to 5,700 RPM
dum
LS Hydraulic Roller Camshaft; 220'/224', .578"/.578", 112'+4'; 1,700 to 5,700 RPM
dum
LS Hydraulic Roller Camshaft; 224'/228', .561"/.561", 114'+4'; 1,900 to 5,900 RPM
dum
LS Hydraulic Roller Camshaft; 224'/228', .578"/.578", 113'+4'; 1,900 to 5,900 RPM
dum
LS Hydraulic Roller Camshaft; 224'/228', .595"/.595", 112'+4'; 1,900 to 5,900 RPM
dum
LS Hydraulic Roller Camshaft; 228'/232', .578"/.578", 114'+4'; 2,200 to 6,200 RPM
dum
LS Hydraulic Roller Camshaft; 228'/232', .612"/.612", 113'+4'; 2,200 to 6,200 RPM
dum
LS Hydraulic Roller Camshaft; 228'/232', .646"/.646", 112'+4'; 2,200 to 6,200 RPM
dum
dum

[al3flangy]

Nobody know a best cam for my mod !!!!!!

[robcas47]

Kinda hard to just pick a cam from this list with the info posted. But you could always go with the middle ground and run something along these lines.

LS Hydraulic Roller Camshaft; 236'/240', .646"/.646", 112'+4'; 2,800 to 6,800 RPM

I just copy pasted it from your list. You might want to try and look around this board and see what others with simular set ups and different cams are making, if it's close to your end goal then you can always go that route. The best possible solution for you would be to contact a reputable cam company and have one custom grind for you application. Pat G, & Futral are a couple good examples that people have had good experiences with. Hope that helps