Results 1 to 7 of 7
Thread: head question
-
06-07-2011, 05:39 PM #1
- Join Date
- Apr 2010
- Location
- Orlando
- Posts
- 28
Black- 2002 Camaro SS
head question
I have a chance of getting 244 casting heads for my 2002 camaro SS and was wondering if they are worth the change. If so does anyone know what kind of power I can expect from them. They are stock 244 heads. Also is there anything I should do to them before I bolt them on? any help would be appreciated
-
06-07-2011, 08:56 PM #2
-
06-08-2011, 04:34 AM #3
- Join Date
- Apr 2010
- Location
- Orlando
- Posts
- 28
Black- 2002 Camaro SS
Woops.. Yeah sorry I meant 243 my mistake was typing did not read as Iwas doing it. But does anyone know the power that I would get from them and if it is worth the swap
-
06-08-2011, 08:17 AM #4
-
06-08-2011, 08:53 AM #5
- Join Date
- Aug 2001
- Location
- San Diego, CA
- Posts
- 8,051
383 w/Meth & ProCharger- 2001 Camaro Z28
243 heads are stock LS6 heads. Your 2002 Camaro SS "may" have those already on it. Some 2002's have LS6 motors. Otherwise you have stock LS1 241 heads. So to swap to 243's stock would be a very slight improvement. Not worth the hassle really. But like 98TransAmWs-6 said...getting them ported and polished and maybe having a valve job done would really make a difference at that point. So buy the heads cheap then put some $$$ into doing 'em up good.
-
06-08-2011, 09:40 AM #6
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,822
2002 Z28 A4 NBM- Sadly now demodded :(
Seriously?
While some LS6 blocks were used to make LS1 engines (only difference is the LS6 is a "window design" and they used them as they ran out of LS1 blocks) no Camaro came equipped with an LS6 engine from the factory.
If his car is unmodded and not a tuner car (GMMG, Earnhardt etc) then I have no doubt it has 241 heads on it.
-
06-08-2011, 09:46 AM #7
- Join Date
- Apr 2010
- Location
- Orlando
- Posts
- 28
Black- 2002 Camaro SS
Yeah I definitely have 241 heads I can get a set for around 400 bucks but was not sure if It was worth it just the way they were to bolt them right on or not
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Another Head and Cam question
By 98TransAmWs-6 in forum Internal EngineReplies: 5Last Post: 04-18-2012, 09:16 AM -
head/cam question
By lsmaxxed in forum Firebird / WS6Replies: 32Last Post: 01-09-2012, 05:39 PM -
Head/Cam Question
By 98TransAmWs-6 in forum Internal EngineReplies: 13Last Post: 01-01-2011, 08:14 AM -
head question
By MCCs WS6 in forum Internal EngineReplies: 6Last Post: 08-04-2007, 04:53 AM -
head question
By dlmeadows in forum General HelpReplies: 1Last Post: 07-20-2007, 03:46 PM
Bookmarks