drivetrain

**ron83** · 03-24-2011, 06:06 PM

Hello people im new to this site just want to say hi.i have some questions about drive
train vibration 95 camaro z28

**pajeff02** · 03-24-2011, 07:08 PM

Welcome! Could be several things -- an out of balance wheel, a u-joint on its way out, a bent rim, bad transmission mount, etc... When does it do it?

**Z28Thunder** · 03-24-2011, 07:16 PM

Welcome to LS1.com. You might want to ask the same quetions in this section. http://www.ls1.com/forums/forumdisplay.php?f=8 You should get a lot of replies there...

**ron83** · 03-24-2011, 07:21 PM

Starts to vibrate at sixty and gets worst as you go, but it's not constant had drive shaft rebalanced reset pinion angle butit still has the balancer on the drive shaft

**KahanaReef** · 03-24-2011, 07:29 PM

Welcome to the site

As Thunder mentioned, post up your issue in the tech section. More people will reply in there.

**ron83** · 03-24-2011, 07:35 PM

Thanks I will do that.

**konigandy6** · 03-25-2011, 06:41 AM

Welcome Ron

**ron83** · 03-25-2011, 07:40 AM

Thanks buddy appreciate the welcome

**pajeff02** · 03-25-2011, 08:07 AM

If you match your 60 mph rpm in a lower gear, do you get a vibration? If not, it is likely a tire balance issue. Some of our cars would only shake over a certain speed when it was an out of balance wheel.

**ron83** · 03-25-2011, 08:14 AM

Yes even if it is in a lower gear it still vibrates

**pajeff02** · 03-25-2011, 08:34 AM

Originally Posted by ron83

Yes even if it is in a lower gear it still vibrates

Same speed, or at a lower speed and same rpm?

**ron83** · 03-25-2011, 08:45 AM

Same speed rpm does not make a difference

**Spaz** · 03-25-2011, 09:58 AM

could be motor mounts... have you ever replaced the bushings on sway bars and other suspension parts???

**ron83** · 03-25-2011, 10:08 AM

Yes I have new control arms new panhard bar torque arm kyb ajustables new springs trans and engine mounts

**024mula** · 03-27-2011, 08:00 AM

Welcome Ron

**ron83** · 03-27-2011, 08:01 AM

Thanks man appreciate the welcome

**KMdef9** · 03-27-2011, 09:26 AM

Welcome!

If your problem gets worse as speed increases, I think it might be a rotating problem. Similar to the ones Jeff mentioned.

**ron83** · 03-27-2011, 10:16 AM

I think I got it figured out their is a balancer on the propeller shaft that's wobbling I
I ordered a new drive shaft we will see what happens

**pajeff02** · 03-27-2011, 06:14 PM

Originally Posted by ron83

I think I got it figured out their is a balancer on the propeller shaft that's wobbling I
I ordered a new drive shaft we will see what happens

That could definitely be the issue.

**ron83** · 03-27-2011, 06:21 PM

the funny thing is it has been balanced twice I figured they would check that

Thread: drivetrain

Thread Tools

drivetrain

Thread Information

Users Browsing this Thread

Similar Threads

Question: IV Gen drivetrain in III Gen truck

drivetrain protection...

WTB/ LS1 drivetrain

drivetrain

A4 drivetrain

Bookmarks

Bookmarks

Posting Permissions