found a simple cheap way to fill the transmission for VETTES

[MRWHOOPPEE]

[ame]http://www.amazon.com/Sprayco-Long-Reach-Plant-Waterer/dp/B000VYGCZW[/ame]

works on an A4
I'm thinking it should work on a manual
I just used a heat gun to make the tube bend the way I needed it so it would fit.

I doubt it would work with 90wt but dexron flows easily and it worked to perfection

found one at a local hardware store for 4 bucks
FYI : the tube goes to the bottom so you just squeeze it to make it work

[sayjoegee]

I use a pump that screws into the top of a quart oil bottle. Got it a Sears for $4. Looks something like this:

http://automotive.hardwarestore.com/...mp-126773.aspx

[MRWHOOPPEE]

have one and like this better
it's easier to use

[pajeff02]

I have a Plews suction gun that I can use to push fluids into hard to reach fill holes. Like your setup, it will work at any angle. Nice find.

[MRWHOOPPEE]

I have a suction pump too
This was easier