cd player fit

[V8MUSCLE]

so im looking at getting the JVC Arsenal KD-A815 for my 2000 ta.

it says when i go to checkout

"What you need to know:

* Extension kit -- when installed, the radio will protrude from the dash by 1/2".
* Unbolt or cut out the factory stereo's rear support bracket to make room for your new receiver."


does this mean it will stick out of the front a half inch if i dont cut the little bracket out, or it will stick out even if i cut it out.

[SteveCZ28]

your correct on the stereo sticking out if you dont cut out the rear support. they make adapters that stick out like 3/4 of an inch and will allow you to install the stereo with no modifications, but in my opinion they look dumb sticking way out like that. i cut the rear support out of my deck support and installed a flush mount and i like it that way

[bberretta]

The bracket is easy to remove. I took pics when I did my Double DIN install:

Step 1.

Remove radio. You'll need to cut out the plastic tray, but that is real easy with a Dremel and a cut-off wheel.


The removed tray and my sexy hand.

Step 2.

Bend this bracket out of the way. I pushed it down and this is what I zip tied my PAC unit to that makes the steering wheel controls work with the Kenwood.

http://www.ls1.com/forums/showthread.php?t=129118

[10erg01]

The bracket is easy to remove. I took pics when I did my Double DIN install:



http://www.ls1.com/forums/showthread.php?t=129118

yep very easy, i had to do that when i installed my double din unit a few days ago.

[bberretta]

One thing I would suggest is to make sure your brackets are sturdy. I made my first set out of sheet metal that was too thin and went back and redid them afterwards.