Results 1 to 8 of 8
Thread: I'm screwed, right?
-
07-20-2010, 11:31 AM #1
- Join Date
- Jun 2010
- Location
- Hallsville, MO
- Posts
- 26
Silver- 2002 TA WS6 M6
I'm screwed, right?
Well, I changed out my rear end oil and put in Royal Purple along with the additive. Didn't help at all.
Then drove 6 hours to chicago and then back and it's REALLY making noise noise.
Video ZIP file removed
if you can look at this vid and tell me if I'm screwed. I don't really want to have the rear end worked on - would rather take that money and buy a better, more heavy duty one.
I plan on never having more than 400hp coming out of the engine. About done dumping money in this pit.
Thanks for your time and opinions. Suggest a good replacement mid line rear end if you can.
DanLast edited by Cutlass; 07-20-2010 at 04:23 PM.
-
07-20-2010, 04:26 PM #2
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
I'm a little leary of downloading a ZIP file to watch your video. No offense and nothing against you, I'm just trying to protect myself and other members from potential virus problems.
Can you post your video on Photobucket or YouTube and link to it so we can watch it worry free
Like I said, no offense to you at all. I'm curious to see the vid!
-
07-20-2010, 05:03 PM #3
- Join Date
- Jun 2010
- Location
- Hallsville, MO
- Posts
- 26
Silver- 2002 TA WS6 M6
Yeah, i can understand the hesitation.
Alot of sick people out there.
I'll see about uploading to youtube. It's 54MB.
Dan
-
07-20-2010, 05:18 PM #4
- Join Date
- Jun 2010
- Location
- Hallsville, MO
- Posts
- 26
Silver- 2002 TA WS6 M6
Here's the public vid
[ame]http://www.youtube.com/watch?v=xNS52OxSjWg[/ame]
sorry about the .zip guys. There's some sick pupies out there that ruin it for the rest of us.
Dan
-
07-20-2010, 06:07 PM #5
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,822
2002 Z28 A4 NBM- Sadly now demodded :(
Yup, you're boned! Looked like the pinion bearing took a dump.
I'm no expert though... But you are boned, that's fer sure...67 Camaro: K-K + 797-z (look it up), 454/Th400/4.10 12-bolt = 6mpg, PS/PDB/PW tilt, tach, gauges...
2005 Corvette LS2/M6 Magnetic Red Metallic (What else would it be?) w/ Cashmere interior
2002 Z28: NBM/Tan, MTI smooth lid, smooth bellows, !AIR, !cats, 1-3/4" QTP SS LT's, 2-1/2" TD's with X-pipe, MagnaFlows dumped at axle, custom welded SFC's, MidWest Chassis body mount adjustable T/A, 3400 stall, 3.23 gears (was 2.73). Tuned: 343rwhp/357rwt (before TD's). Best: 12.559 @ 108+, 1.73 60' @ 3500' DA w/MT ET Street DR's.
Carbon footprint? CLOWN SHOE!
-
07-20-2010, 06:47 PM #6
Yeppers, Jim is right. Not only are the bearings toast, but that also ruins the gear set. No more nice pattern, and noisy gears from here on out.
That will have to be completely gone through, new gears, bearings, seals etc....and the housing flushed,,,it's probably full of crap. So I'd replace axle bearings too to be on the safe side.
I'm even amazed it's not leaking yet. I don't see anything wet around there. The seal can't do it's job with the yoke wobbling around,,,lol. Usually they spew oil.Last edited by Firebirdjones; 07-20-2010 at 06:49 PM.
-
07-20-2010, 07:06 PM #7
- Join Date
- Jun 2010
- Location
- Hallsville, MO
- Posts
- 26
Silver- 2002 TA WS6 M6
Thanks for the info.
I drove back from CHicago yesterday with it like this [6 hour drive].
not too bad at 70mph, but in towns and slowing down sounded like it was going to fall apart. lol
Instead of rebuilding, I'm just going to install a fab'd 9" from Midwest.... Expensive, but looks like it's a one time deal. I want to have fun in the car - not walk on eggshells.
Dan
-
07-20-2010, 07:18 PM #8
That's a good idea. You'll never look back after getting a 9".
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Am I Screwed??
By rajiv1998 in forum Almost Anything GoesReplies: 17Last Post: 10-22-2010, 04:06 AM -
Help: OMG how screwed em I?!
By TransAmPhantom in forum General HelpReplies: 31Last Post: 07-05-2010, 12:26 AM -
So am I screwed?
By burnws6 in forum Almost Anything GoesReplies: 94Last Post: 07-31-2007, 05:21 AM -
Screwed
By silver98TA in forum General HelpReplies: 9Last Post: 05-28-2007, 10:50 AM -
I'm screwed......
By HASTINGSRJ in forum Western MembersReplies: 18Last Post: 08-18-2005, 02:47 PM
Bookmarks