front turn lens looks cloudy

[04goatinmass]

ok i was wondering if the front turn signal lens was removeable.if so how? i wanna take it off to clean the inside of the lens cause there seems to be condensation build up over time that left the lens looking cloudy

[Fastcar]

ok i was wondering if the front turn signal lens was removeable.if so how? i wanna take it off to clean the inside of the lens cause there seems to be condensation build up over time that left the lens looking cloudy

As far as I know, you have to remove the whole lens / turn signal reflector assembly, the lens itself is not removable. There's an access panel behind the bumper that's held shut with a few screws. Take out the screws and you can get to the fog light bulbs and turn signal housing assemblies. If there's condensation inside the housing it's developed a leak, usually from a crack somewhere. Both of my turn signals / daytime running lights have condensation inside, I'm going to replace both housings.

[04goatinmass]

thanks but how do i remove the housing

[third_shift|studios]

i believe it's just a few bolts that you'll need a really tiny socket to get to them with. i attempted to take mine out once and couldn't b/c my socket wrech was too big.