Questions about heater hose mod

**stephen02ws6** · 09-15-2009, 03:38 PM

I was thinking about doing the heater hose mod on my car but had a couple questions about it before i do it. I have a non adjustable PHB and LCAs, is that a bad thing for lowering it like that? Will not having an adjustable PHB put the rear end out of line or off center? Will the stock shocks work with this mod? Am i going to have to adjust the torque arm after i do this? Is there a way of lowering the front without springs?

**stephen02ws6** · 09-16-2009, 04:22 AM

anyone have any idea on these questions?

**SOMbitch** · 09-16-2009, 10:33 AM

It doesn't really lower it enough to throw the adjustment off so PHB should be ok.

Stock shocks are ok for this.

Cut front springs (not recommended) or Koni's on the lower perch (expensive). Or maybe just buy a front set of springs....