torquer v2 cam

**redLss1** · 07-08-2009, 11:28 AM

Can you run a torquer v2 cam on stock heads with the supporting mods? I have a 2002 ss a4. I know that i need a stall so what size should i look at? I am also gonna buy some longtubes as well... or anyother cams out there that would work better... I'm looking at trying to to a cam only setup

**Svt killa** · 07-08-2009, 08:40 PM

yes the torquer v2 will work with stock heads with supporting mods like springs and lifters. as far as the stall i would stay around the 3500 range but nothing really higher than that.

**Dr.Crash** · 07-08-2009, 09:08 PM

Originally Posted by Svt killa

yes the torquer v2 will work with stock heads with supporting mods like springs and lifters. as far as the stall i would stay around the 3500 range but nothing really higher than that.

dont forget pushrods

**Z28boy2000** · 07-08-2009, 09:10 PM

i just installed my Torquer V2 as my cam only DD, i would highly recommend a cam package to suite the needs of the car

**redLss1** · 07-09-2009, 11:03 AM

well i want to have this car as a daily driver thats got some kick to it and sounds really nice at a stoplight. the whole setup would be ls2 timing chain, ls6 ported oil pump, camshaft and gasket kit...what else would i need? of course pushrods, springs, and lifters would be includes since i can get that in the cam package...anything else i might need to look at? maybe a different exhause bc i have slp dual dual that came on it. it is an slp ss... the longtube and y pipe will the hook up with that or would i need to get a different one or dump it?

**01ws6er** · 07-10-2009, 04:48 PM

Originally Posted by redLss1

well i want to have this car as a daily driver thats got some kick to it and sounds really nice at a stoplight. the whole setup would be ls2 timing chain, ls6 ported oil pump, camshaft and gasket kit...what else would i need? of course pushrods, springs, and lifters would be includes since i can get that in the cam package...anything else i might need to look at? maybe a different exhause bc i have slp dual dual that came on it. it is an slp ss... the longtube and y pipe will the hook up with that or would i need to get a different one or dump it?

You need to pull the heads to change the lifters, how many miles on the car? Also you will need an aftermarket y pipe or have one custom made to fit (personally I'd go with the latter of the 2).