Results 1 to 6 of 6
  1. 01-30-2006, 06:01 PM #1
    NeeD4SpeeD
    NeeD4SpeeD is offline
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,718

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Send a message via AIM to NeeD4SpeeD Send a message via MSN to NeeD4SpeeD Send a message via Yahoo to NeeD4SpeeD

    Here comes the CAM!!!! Almost done installing!!

    Well... Just thought i'd update everyone on the cam install..... Things are going well we're almost done putting the cam in and so far all the other parts have been installed...

    Here's a list:

    Motive 4.10's
    BMR Weld In SFC's
    BMR Adjustible TA
    BMR LCA's
    BMR Adjustible Pan Hard Rod
    Nitto 555DR 315/35/17VR

    That's what has been put in so far and it's looking real nice... Just gotta finish gettin the cam in with all the valveterrain and then do a bunch of pulls on the dyno to tune it and YIPPIE it's done!!!

    The cam that is being installed is a Thunder Racing Custom Grind 232/237 .595/.605 111.4LSA.... So hopefully we can push past the 400 RWHP mark with the cam and majority of the supporting bolt ons!!!! We shall see!!
    Reply With Quote Reply With Quote
  2. 02-07-2006, 04:17 PM #2
    hammertime
    hammertime is offline
    Tech Junkie hammertime's Avatar
    Join Date
    Nov 2005
    Location
    Belleville, IL
    Posts
    400

    Pewter Metallic
    2001 Camaro SS

    Any numbers on the cam install yet?

    Also, is that cam only, or have you changed cyl heads?

    Good Luck!
    Hammer - hammertime.us
    2001 Light Pewter Metallic Camaro SS, 6 speed
    K&N, SLP Lid, SLP y-pipe, GMMG cat-back, Lou's Short Stick - more to come!
    Reply With Quote Reply With Quote
  3. 02-07-2006, 06:30 PM #3
    Street Lethal
    Street Lethal is offline
    Senior Member Street Lethal's Avatar
    Join Date
    Aug 2005
    Location
    New Jersey
    Posts
    1,251
    Quote Originally Posted by NeeD4SpeeD

    Nitto 555DR 315/35/17VR
    Any pics?
    Reply With Quote Reply With Quote
  4. 02-12-2006, 12:25 PM #4
    NeeD4SpeeD
    NeeD4SpeeD is offline
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,718

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Send a message via AIM to NeeD4SpeeD Send a message via MSN to NeeD4SpeeD Send a message via Yahoo to NeeD4SpeeD
    Nah man sorry no pix but it is cam only with no cylinder heads and it dynoed 411.53 HP and 403.9 TQ with a TR232/236 .595/.605 112LSA with other supporting bolts ons but not all of them....
    Bulletproof Performance
    2002 Trans AM WS6 M6 Collectors Edition
    LSX 427 F-1R Procharged Build Underway
    Estimated Finish Date: Summer 2012-2013
    Reply With Quote Reply With Quote
  5. 02-12-2006, 12:26 PM #5
    NeeD4SpeeD
    NeeD4SpeeD is offline
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,718

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Send a message via AIM to NeeD4SpeeD Send a message via MSN to NeeD4SpeeD Send a message via Yahoo to NeeD4SpeeD
    Ill post a pix of the dyno sheet as soon as my new printer arrives!!!
    Reply With Quote Reply With Quote
  6. 02-12-2006, 12:30 PM #6
    NeeD4SpeeD
    NeeD4SpeeD is offline
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,718

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Send a message via AIM to NeeD4SpeeD Send a message via MSN to NeeD4SpeeD Send a message via Yahoo to NeeD4SpeeD
    Quote Originally Posted by Street Lethal
    Any pics?
    I'll post some pix of the tires in alil bit!!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Installing a Cam?
    By Justin23454 in forum Internal Engine
    Replies: 14
    Last Post: 07-01-2010, 09:31 AM
  2. installing lt1 over the top
    By fastlt196 in forum LT1
    Replies: 0
    Last Post: 03-16-2009, 07:37 PM
  3. about to do my first mod.... installing an slp lid
    By derrinx in forum External Engine
    Replies: 23
    Last Post: 08-08-2007, 03:13 PM
  4. installing a cam
    By timd13 in forum General Help
    Replies: 2
    Last Post: 09-10-2006, 03:45 PM
  5. Installing TCS ??
    By Necction in forum General Help
    Replies: 11
    Last Post: 02-09-2006, 08:59 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules