Results 1 to 17 of 17
Thread: z28 vs skyline gtr
-
03-15-2009, 10:34 AM #1
- Join Date
- Aug 2007
- Location
- cuarcao
- Posts
- 19
- 2000 z28 m6
z28 vs skyline gtr
Hi a friend of mine just got a r32 skyline from japan, and he saying he can beat me in a 1.4 mile .
His car is stock , i don`t know how fast these car are.
I have a 2000 z28 m6 camaro with longtube, lid and hotcams, but he has 4wd, so i don`t know. how fast are they in a 1/4 mile?
-
03-15-2009, 12:16 PM #2
- Join Date
- Mar 2009
- Location
- Henderson, Tx
- Age
- 41
- Posts
- 1,674
- '99 -- Z/28 -- Pewter
13.00 to 13.20 if he really is bone stock. And in that car, it doesn't even take an experienced driver to hit those times. Should be an interesting run with your mods.
Suggestion -- Play with him from a roll. He'll murder you off the line then you'll be left nervously playing catch up.
-
03-15-2009, 12:20 PM #3
- Join Date
- Mar 2009
- Location
- Henderson, Tx
- Age
- 41
- Posts
- 1,674
- '99 -- Z/28 -- Pewter
Here's the full specs..
R32 GTR
-
03-15-2009, 12:30 PM #4
Get the jump on him, know how to drive... and if all goes perfect?
Well it should be close and alot of fun, if he gets a fender on you
you will be toast!
I agree with the rolling start!!!
-
03-15-2009, 12:30 PM #5
^^^agreed if he is a decent driver he will kill you off the line, those cars pull quick E.T's mainly from there 60ft on the highway or above 80mph you will pull on him with no issues, especially with your mods. So the thing you wanna look at is whats your MPH in the quarter mile yours will most likely be higher but he will pull a quicker time. Atleast youll know you have a faster car then him just not quicker then him in the quarter. One thing i use to do with my 93Z, ofcourse i had a Stage 3 clutch with all the bolt ons as well.
I would take off in 2nd gear, it really cut down on banging gears going from 1st to 2nd gear and would just be the right amount of bog, i should mention i had 4.10's as well that really helped. As far as the quarter mile i was able to pull .3-.4 tenths quicker doing that which isnt a whole lot but when i coupled it with powershifting i was able to be about a .5 tenths quicker and every little bit helps. There are people who powershift and are able to pull quicker times but im no expert driver.Last edited by karpetcm; 03-15-2009 at 12:36 PM.
1993 Z28 M6: K&N Intake, 52mm TB, TB Bypass, No Cats, Exhaust Cutout, Flowmaster Muffler, 3.90 Gears, 160 Thermo, Tune, BMR Springs, Bilstein Shocks, 3 Point SFC,s & MGW Shifter.
-
03-15-2009, 12:55 PM #6
-
03-15-2009, 03:59 PM #7
hes definately gonna get you from a dig if he is willing to bust a beast launch but you should have the faster car.
-
03-17-2009, 06:38 PM #8
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
There was a guy at Firebird in Phoenix with a Skyline from Japan (RH drive and all) about a month and a half ago. He was twisting it hard off the line (it seemed to leap off the line) with 60' around 1.5xx~1.6xx and 1/4 in 11.6 at ~115. Needless to say I was mighty impressed as he turned roughly the same time again and again. He stated that it was stock and when I peered under the hood it sure looked unmodified.
-
03-17-2009, 07:09 PM #9
- Join Date
- Aug 2007
- Location
- cuarcao
- Posts
- 19
- 2000 z28 m6
let me tell you, i beat him but just. Those things are Fast and the engine sounds great. We where dead even off the line and by 4 gear i pulled a bumper on him. I did 12.53 and he did a 12.62
And the dam thing is 18 years old with 142.000 km on it . but it can still pull like hell, i`m verry impressed.
-
03-17-2009, 07:15 PM #10
- Join Date
- Mar 2009
- Location
- Henderson, Tx
- Age
- 41
- Posts
- 1,674
- '99 -- Z/28 -- Pewter
congrats on the win! still close enough that the slightest goof would have given him the win.
-
03-18-2009, 05:43 AM #11
awesome...good job
-
03-18-2009, 05:45 AM #12
your a cammed LS1 M6 if your cant go least mid 12s something is wrong. hes a 13s car if stock...
-
03-18-2009, 06:35 AM #13
-
03-18-2009, 06:45 AM #14
if you cant go mid 12s stock motor something is wrong. a good strong running ls1 car runs mid 12s. a 02 ss i tuned with stock mainfolds/stock cats with the 345 package which isnt nothing more then a lid/filter and SLP muffler. went 12.7 on bald nittos. tossed in 456 with suspension with a 1.9 60 and went 12.60. car with good traction would of went deeper. takes an aggresive 6spd driver to get them to work well. your typical 6spd driver sees 13s at best
got a ex GF car with LTs,ORY borla with my tune and 2400 stall and 342s on eagle F1s to go 12.7 on stock suspenion. 1.8 60' this was with a Ws6
now before you jump the gun. track condition and elevation plays huge rule along with DA. these times were ran in good weather
-
03-19-2009, 05:42 PM #15
Just bolt on some slicks or drag radials and you'll murder him from the start and all the way through the 1/4 mile.
-
03-20-2009, 09:07 PM #16
Rare car congrats nothing like a close race win or lose for the adrenaline.
-
03-20-2009, 10:03 PM #17
- Join Date
- Jun 2008
- Location
- Annapolis, MD
- Posts
- 1,111
BLK/BLK w/CGM Stripes- 2010 Camaro 2SS/M6
NICE! the Skyline is def. a fast crazy car that deserves the respect
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Skyline movie
By Danger731 in forum Almost Anything GoesReplies: 8Last Post: 11-16-2010, 01:43 AM -
Skyline Drive Cruise
By sbackof in forum Eastern MembersReplies: 12Last Post: 03-19-2010, 08:11 AM -
LS1 Swap into a 96 R33 Skyline GTS
By R33LS1 in forum New Member IntroductionsReplies: 18Last Post: 05-26-2009, 11:52 AM -
Z06 Vs Skyline GTR
By 001CamaroSS in forum CorvetteReplies: 60Last Post: 04-10-2008, 02:29 PM -
GTO STOMPS Skyline!!!!!!!
By 5.7literMustangEater in forum GTOReplies: 29Last Post: 07-18-2007, 11:49 AM
Bookmarks