Results 1 to 20 of 28
Thread: Removing interior
-
03-19-2011, 08:26 AM #1
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Removing interior
How do you get the center consol out? I have all 5 bolts out. And it seems like theres a wire that connects to some random thing under the ashtray (ill probably cut that) and i have the shifter off. Cant seem to get it over the ebrake tho.
And how do you get the backseat panel coat hangers off?
And how did you remove the wire cluster under the passenger seat...it seems jammed. I got the driver side with no problem at all but dayumm the passengerside is stuck
Help.
-
03-19-2011, 09:01 AM #2
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
1. I'll have to take a look at mine again but i think the ebrake has to be all the way up, the wire could be to your ashtray light, not sure though. post up pics if you can.
2. on the front of it there should be a little flap that flips out to get to whats holding it. A pick or something of that nature should help you out.
3. Can't help with that one, camaro doesn't have an electric passenger seat
-
03-19-2011, 09:09 AM #3
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
Some one did a write up for the center console removal somewhere. Brb.
The additional wire, if it's the ash tray light, should be really small/skinny compared to most of the cars wiring.
I've never removed the power seat stuff, can you snap a pic of the harness?
-
03-19-2011, 09:33 AM #4
1. The center console...I assume you mean the lower half if you are having issues with the e-brake. Pull the e-brake up all the way and you will have to pivot the console piece (pull the rear part up and slide the console piece back towards the rear). I cannot remember the exact number of bolts, but 5 sounds correct. If you are not able to move the console easily, then you have some more bolts to remove.
Not sure what the wiring under the ashtray would be besides to a light bulb. Is it an A4 or m6? There should be enough slack to lift the console alittle to see where it goes to and remove it without cutting.
2. To remove your coat hangers, you have to pull out the center piece (the square piece). There is a slot along the bottom, you can use a screwdriver to pry it out, then just pull straight back to remove the center piece. Then the hook portion should come out easily.
3. Removing the wiring under the passenger side...Are you trying to remove the harness that is located beneath the carpet? If so, its easiest to remove the trim along the door sill and lift up the carpet. Follow the wiring towards the center console and you will see it held down by a square piece of black-rubberish tape. It then goes over the driveshaft tunnel (might have to loosen the airbag sensor and e-brake bolts to remove the wiring) and then it is held on by another piece of rubber tape on the driver's side.
I just removed my wiring about a month ago, but sorry no pics of the wiring in the car.
Here is a pick of the wiring harness removed and the bottom of the seats. The wiring harness is below the seats on the carpet. The seat with the black box (lumbar motor) is the passenger side seat.
Last edited by peterlawl84; 03-19-2011 at 09:36 AM.
-
03-19-2011, 11:31 AM #5
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Alright thanks i got it all out now. Got the headliner in and working on the carpet...which is a bitch. It didnt come precut so we have to guess and check. Ill be picking up some 3M carpet glue tonight and finishing up tom.
Then its off to removing the catback and painting the calipers and rotors...
Spring break=mod time
-
03-19-2011, 11:34 AM #6
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
sound fun, i gotta get around to painting my calipers soon. dont forget before and after pics
-
03-19-2011, 11:37 AM #7
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Everythings out
New carpet awaiting to get cut and installed...
-
03-19-2011, 11:42 AM #8
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Headliner before (and i had NO VIsors!!!)
grey
And here ya go another b4...it was rediculous how dirty it was and stains like none other...oh and we found half a joint...my stoner friend verifie it...
-
03-19-2011, 03:31 PM #9
- Join Date
- Jul 2009
- Location
- North of the Motorcity
- Posts
- 2,612
Custom Swirly Black- 2001 WS6 M6
Quite the project going on!
Running new audio equip at all? Looks like a good time to run new wires.
-
03-19-2011, 04:11 PM #10
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
Perfect time to cut and reshape that hump on the passenger side floorboard
-
03-19-2011, 04:11 PM #11
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Ive ran Memphis door speakers in both my cars. Didnt need to remove anything to install them in my firebird. And i said forget the hassel so i let dr. Dashboard put them in my ws6. Saved me a saturday. This summer im getting a new engine and a few goodies
Money money money
-
03-20-2011, 01:23 PM #12
-
03-20-2011, 02:48 PM #13
-
03-20-2011, 03:49 PM #14
-
03-20-2011, 04:00 PM #15
- Join Date
- Mar 2011
- Location
- Waynesboro, Pa
- Posts
- 256
Mystic Teal Metallic:320c- 1998 Camaro Z/28
yea unless your riding in the pass seat the hump doesnt matter
-
03-20-2011, 08:28 PM #16
- Join Date
- Oct 2008
- Location
- Coral Springs, Fl
- Posts
- 5,774
Sunset Orange Metalic- 2001 Camaro SS
i got 2 friends with camaros and it bug the crap outta me
whatever i can do to create a pleasant riding experience for my passengers
-
03-20-2011, 10:36 PM #17
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
-
03-21-2011, 07:31 AM #18
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,785
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I guess it's to late to suggest Dynamat sound proofing before you re-install the carpet.
-
03-21-2011, 09:27 AM #19
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
i see no point in dynomat unless the car has subs
-
03-21-2011, 09:28 AM #20
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Camaro Interior Upgrades - Interior Design
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 07-21-2011, 09:52 AM -
Camaro Interior Upgrades - Interior Design
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 04-23-2011, 12:21 AM -
Removing The Interior Rear Hatch Covers
By MAXX2 in forum General HelpReplies: 2Last Post: 01-19-2011, 08:09 PM -
want to trade Charcoal interior for tan interior
By DADillac in forum Parts For Sale / TradeReplies: 2Last Post: 03-28-2009, 07:56 PM -
Removing Interior part?
By Bouvers in forum General HelpReplies: 2Last Post: 05-14-2008, 11:49 AM
Bookmarks