Results 1 to 1 of 1
Thread: new clutch problem
-
01-30-2018, 03:09 PM #1
- Join Date
- Jan 2018
- Location
- MO
- Posts
- 1
orange- 1969 camaro
new clutch problem
Hello new to site. Had a question on a 2001 t56 behind a LS1 changed the factory clutch, pressure plate, hyd throw out bearing, and pilot bearing. I had the flywheel turned. Installed this and the trans doesn't go into reverse right away then grinds going in. I know reverse isn't synchronized. We've re-bled no air. Other than a new part problem we are trying to figure out why the hyd part doesn't push out far enough to fully disengage the clutch. maybe some one had this happen and can help.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: clutch problem 98 z28
By Big Red Daddy in forum DrivetrainReplies: 7Last Post: 01-30-2009, 02:45 PM -
Clutch Problem
By Blackout01 in forum Manual TransmissionReplies: 2Last Post: 08-07-2007, 02:48 PM -
is it a clutch problem, or a tranny problem?
By sgt0704 in forum Manual TransmissionReplies: 3Last Post: 01-07-2007, 04:03 PM -
Another possible clutch problem
By crazyTAlover in forum Manual TransmissionReplies: 4Last Post: 01-05-2007, 10:39 PM -
Clutch problem!
By RYDER661 in forum Manual TransmissionReplies: 2Last Post: 05-11-2006, 03:57 PM
Bookmarks