Pics of where you put your bottle

[ProwlerZ]

Evidently I haven't taken any good pictures of it, but this gives you the idea. BTW, normally the spare tire cover is covering it...

[NeeD4SpeeD]

Evidently I haven't taken any good pictures of it, but this gives you the idea. BTW, normally the spare tire cover is covering it...

Nice all tucked away... And i LOVE the NOS energy drink setup... MADDDD funny lol!

[GotN2O]

Evidently I haven't taken any good pictures of it, but this gives you the idea. BTW, normally the spare tire cover is covering it...

That is to funny.

[greatwhiteZ28]

Here's mine !

hey did you just mount that as is, cause im doing the same but in between the rear seats and some say i need a different fitting? is between the rear seats ok to do for drirlling and everything?

[bills98ta]

I lifted the carpet out & welded a plate in to bolt every thing to. I pull 1.36 60' times, & didn't want them going through the rear glass !!!

[greatwhiteZ28]

soo there is no 90 degre fitting to have it mount that way. i guess i got some bad info sometime ago

[bills98ta]

If you are talking about the blow down tube, ( 90 degree pipe ), You will need that for safety ( NHRA ).... It will come long, then just cut it off so it's only a few inches through the floor.

[bills98ta]

[greatwhiteZ28]

no im talking abbout the mounting of the bottel. someone here told me that if i mount my bottle ( valve facing forward, in mid of rear seats) that i will need a different fitting for the valve or something.

[greatwhiteZ28]

mine will be exactly like yours just in between the rear seats. i dont see what the person was trying to tell me.

hey is drill on the trans tunnel hump what should i look out for?

[bills98ta]

When you start your project, have the car jacked up & just check under before drilling. I don't think anything will obstruct you there. On mine, I got some thick flat steel, welded it to the deck, then drilled & tapped it for the mounting bolts. Put the carpet over top !

[greatwhiteZ28]

cool thks

[98T/Aformula]

So im thinking no one has put there bottle in the middle of the back seats lol...

[greatwhiteZ28]

When you start your project, have the car jacked up & just check under before drilling. I don't think anything will obstruct you there. On mine, I got some thick flat steel, welded it to the deck, then drilled & tapped it for the mounting bolts. Put the carpet over top !

should i add this or should just mount directly to tunnel

http://www.ws6project.com/user_stor/...NO-00-3300.gif

[greatwhiteZ28]

i also found the 90 degre outlet. what is that even used for

[bills98ta]

I never seen the tunnel mount brackets before ! I like that. Pop the two rear seats & probably mount over the carpet. I'd do it !!!

[bills98ta]

i also found the 90 degre outlet. what is that even used for

You don't need it, just depends on how you want to run the line. If you use it, the system will still work fine !!!

[bills98ta]

Of coarse, I'd put the rear seats back in !!! At least if you have someone in the back, they will now have a pretty cool arm rest !!! LOL

[mpunklil]

should i add this or should just mount directly to tunnel

http://www.ws6project.com/user_stor/...NO-00-3300.gif

somebody PLEASE buy this and mount something to it! i like it a lot, lol

[00ssSLP]

I will try to take some pics but my bottle is where the spare tire use to be.