FS: LS1 Engine stage 2 heads/cam

**Linear Velocity** · 03-20-2007, 07:31 AM

Hi guys,

I had this motor built for my car but it was never installed as I'm selling off the car. All parts are new and professionally assembled by Redline Motorsports in Yorba Linda, CA. Details are as follows

346 Motor
LS1 block
TSP Stage 2 Heads
305 cfm @ .600" intake, 210 cfm @.600" exhaust
Thunder Racing 224/224 .566/.566 114 LSA Cam
Rev 1116 Dual Springs with Titanium Retainers
Chrome Moly Pushrods
Stock Coated Pistons
Stock Connecting Rods with ARP rod bolts
Stock Lifters
LS6 Oil Pump
JWIS Timing Chain
Stock Pulley
LS6 Intake
28.8 Injectors

$3500 obo

Buyer pays shipping, I have pics available upon request. Thanks.

**TRY ME GT** · 03-20-2007, 09:20 AM

How much power did they say it would make?

**Linear Velocity** · 03-20-2007, 09:47 AM

This was esmitated at anywhere between 400rwhp to 425rwhp depending on your drivetrain/exhaust setup. So probably 500hp at the flywheel.

**TRY ME GT** · 03-20-2007, 09:51 AM

Sounds good. Im not looking, however ill pass ppl to this tread if I find someone. Maybe some streetrodders my pops knows.

**ScrapMaker** · 03-20-2007, 11:18 AM

What, if anything would need to be done to the stock ECU to get unleash this beast?

**Linear Velocity** · 03-20-2007, 11:33 AM

Thanks Try Me.

Scrapmaker: You'd need definitely tune your PCM to get the most out of this setup. There are many tuners out there for LS1's.

**Linear Velocity** · 04-04-2007, 07:48 AM

ttt

**LS1W** · 04-04-2007, 05:22 PM

Originally Posted by Linear Velocity

Hi guys,

I had this motor built for my car but it was never installed as I'm selling off the car. All parts are new and professionally assembled by Redline Motorsports in Yorba Linda, CA. Details are as follows

346 Motor
LS1 block
TSP Stage 2 Heads
305 cfm @ .600" intake, 210 cfm @.600" exhaust
Thunder Racing 224/224 .566/.566 114 LSA Cam
Rev 1116 Dual Springs with Titanium Retainers
Chrome Moly Pushrods
Stock Coated Pistons
Stock Connecting Rods with ARP rod bolts
Stock Lifters
LS6 Oil Pump
JWIS Timing Chain
Stock Pulley
LS6 Intake
28.8 Injectors

$3500 obo

Buyer pays shipping, I have pics available upon request. Thanks.

does the motor have the front and rear cam covers already ?
does it come with an oil pan ? which style pan ?
-please pm me pictures
-thanks
shane