****GroundHog Day February Train******

[SMWS6TA]

Saw this last night and thought of Jeff.

[pajeff02]

Heading out to the garage to try and find the cause of an annoying rattle in the ass end of our Suburban.

[pajeff02]

Saw this last night and thought of Jeff.

I just made Dawn watch this with me.

[wileyCoyote]

..back to the single digit lows for us this week...

[GTP231]

Mornin

[pajeff02]

Tuesday greetings. A little snow overnight here and more coming today. Yeah, it is going down to the bottom of the thermometer this weekend.

Hoping I'll be in the office today. I was on the road yesterday for Court from 8:15 until 3:45 so really didn't accomplish much of anything.

Last night, I began the tear down on my brother's engine for his M151 A1. After setting everything up in my work space, I pulled the spark plugs, scoped out the bores and after pouring a little oil in each cylinder I rolled the engine over to see how things felt. I then pulled the rocker cover and carb off it. Kind of a neat setup really. The 24V ignition and charging systems are totally sealed from moisture, it runs an auxiliary vacuum pump in place of what would be a fuel pump on most old school engines, it has a "log style" exhaust manifold, and the camshaft runs down low in the block on the passenger side of the crankshaft. My brother has collected a complete engine gasket set, spare carb and a new water pump for it so far.

[SMWS6TA]

M151 A1 are fun as hell to drive. Major problem with short wheel base but still fun.

[GTP231]

Tuesday greetings. A little snow overnight here and more coming today. Yeah, it is going down to the bottom of the thermometer this weekend.

Hoping I'll be in the office today. I was on the road yesterday for Court from 8:15 until 3:45 so really didn't accomplish much of anything.

Last night, I began the tear down on my brother's engine for his M151 A1. After setting everything up in my work space, I pulled the spark plugs, scoped out the bores and after pouring a little oil in each cylinder I rolled the engine over to see how things felt. I then pulled the rocker cover and carb off it. Kind of a neat setup really. The 24V ignition and charging systems are totally sealed from moisture, it runs an auxiliary vacuum pump in place of what would be a fuel pump on most old school engines, it has a "log style" exhaust manifold, and the camshaft runs down low in the block on the passenger side of the crankshaft. My brother has collected a complete engine gasket set, spare carb and a new water pump for it so far.

Still a L head six?

[pajeff02]

Four in a row.

[pajeff02]

Will probably continue tear down on the pseudo-jeep this evening. I remembered to cut some labels at the office yesterday for bagging parts. It's the only way to keep stuff straight besides taking lots of pictures.

[Zapper2003]

Sitting in the dentists chair waiting on numbness to set in...

[0rion]

Sitting in the dentists chair waiting on numbness to set in...

did you feel a little prick in your mouth? You may not be at the dentist if so.

[SMWS6TA]

did you feel a little prick in your mouth? You may not be at the dentist if so.

I had to re-read that....

[pajeff02]

Too many sweets?

[GTP231]

Afternoon

[Firebug]

Sup yanks...

[67CamaroRSSS]

Sup yanks...

Well, look what the cat dragged in! Wassup Bug...

[Firebug]

Not much mate. Living the dream. ..

[0rion]

Not much mate. Living the dream. ..

I thought for sure a dingo would've ate your baby by now

- - - Updated - - -

Afternoon

you still have a backyard full of dirt and grass? I looked and sure enough.....I have the same shit in mine.

[Firebug]

Oh how I've missed you... Tim...