What did you do with your Trans Am today?

**98TransAmWs-6** · 04-10-2012, 03:36 PM

Originally Posted by 02 WS6 TA:2764756

I'll tell you this, the FAST rails require a lot of finesse to get the injectors to seat properly- Shimming, re-adjusting, etc. I've had these for years, and I loathe every time I have to pull them. I'd probably look hard at the LS2 rail. And yes, the injectors were painted also.

Anything special required when painting injectors? I was thinking about painting mine.

**02 WS6 TA** · 04-10-2012, 03:39 PM

^ Yep, masking tape.

A few more things accomplished today... If it weren't for legitimate work coming in, I could get a lot done. hahah

**KMdef9** · 04-10-2012, 05:53 PM

Ordered a $300 custom car cover today. Better keep bad thoughts from even getting through it for that price.

**raynor139** · 04-11-2012, 12:02 PM

Took out all the AIR parts including pump. Also got the new ecu tuned by frost in. Now just gotta start pulling the old manifolds and y-pipe for new stuff.

**98TransAmWs-6** · 04-12-2012, 08:24 AM

Look what came in just a few minutes ago!

I can't wait to install it!!!

**pajeff02** · 04-12-2012, 08:28 AM

Early Christmas?

**98TransAmWs-6** · 04-12-2012, 08:49 AM

Originally Posted by pajeff02:2765419

Early Christmas?

Nope didn't cost me a dime, sold my ws6 hood for it and covered the costs with the money from it.

**transamtom** · 04-12-2012, 09:06 AM

Got the drag springs and shocks installed,also new front LCA bushings and tie rods.

Had the alignment done and set to minus 1* camber 4* caster and 0* toe.

Now to get to the strip Saturday and see if she 60fts any better.

**TA98** · 04-12-2012, 09:36 AM

^^^ How come you had the alignment set up like that?

**98TransAmWs-6** · 04-12-2012, 01:16 PM

The hood is on just needs some adjusting, I think my bumper does too. Not the best pictures but here they are:

The passenger side has a much larger gap than the drivers. All in all it is a good fit, I just need to tweak a few things and I should be good hopefully.

**Too Fast** · 04-12-2012, 01:47 PM

Originally Posted by TA98

^^^ How come you had the alignment set up like that?

Yeah I was wondering why so much neg camber.

And Will, that hood looks sick.

**98TransAmWs-6** · 04-12-2012, 02:00 PM

Originally Posted by Too Fast:2765528

Originally Posted by TA98

^^^ How come you had the alignment set up like that?

Yeah I was wondering why so much neg camber.

And Will, that hood looks sick.

Thanks man, hopefully soon I'll detail her and take some better photos all around.

**transamtom** · 04-12-2012, 02:40 PM

Originally Posted by TA98

^^^ How come you had the alignment set up like that?

Drag racing,less rolling resistance.

**transamtom** · 04-12-2012, 02:43 PM

Originally Posted by Too Fast

Yeah I was wondering why so much neg camber.

And Will, that hood looks sick.

-1* is too much?

**TA98** · 04-12-2012, 02:52 PM

So the wheels don't angle as much when there's no weight on the front??

**transamtom** · 04-12-2012, 03:11 PM

I guess I messed up,it should be .5* or 0*

It feels good and its not following every rut in the road,if I notice anything unusual I will get it realigned.